1. Manuals
  2. Brands
  3. Lanner Manuals
  4. Computer Hardware
  5. AP-40AHD
  6. Manual

Lanner AP-40AHD Manual

486 half-size cpu card with flash disk
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AP-40AHD
486 Half-size CPU Card
with Flash Disk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-40AHD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lanner AP-40AHD

Summary of Contents for Lanner AP-40AHD

  • Page 1 AP-40AHD 486 Half-size CPU Card with Flash Disk...
  • Page 3 © OPYRIGHT This document is a copyright of the original manufacturer, 1998. The original manufacturer reserves the right to make improvements to the product(s) described in this manual at any time without notice. This manual may not, in whole or in part, be photocopied, reproduced, transcribed, translated, or transmitted in whatever form without the written consent of the manufacturer, except for copies retained by the purchaser for backup purposes.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS CHAPTER 1 : INTRODUCTION Preface Specifications Packing Check List Board Outline of AP-40AHD CHAPTER 2 : JUMPER SETTING & CONNECTORS Jumper Setting for AP-40AHD Connectors Description 2.2.1 System Status Indicate and Control Connectors 2.2.2 I/O Connectors Description...

  • Page 7: Chapter 1 : Introduction

    CMOS technology that allows the AP-40AHD to withstand and adapt harsh industrial environments very well. The AP-40AHD is built as an ISA expansion card that is simply upgraded by changing one card from another without replacing the whole system. It provides the primarily elements for building an IBM PC/AT compatible computer for a wide variety of embedded system applications.

  • Page 8: Specifications

    AP-40AHD USER’S MANUAL 1.2 Specifications Features Supported Elements : Intel 80486 series, AMD 486 series, AMD＆Cyrix 5x86 series Chipset : ALI M1489/M1487 & SMC37C669 Chipsets System Memory : Two 72-pin SIMM sockets for FPM/EDO DRAM up to 128MB and support memory parity function...

  • Page 9: Packing Check List

    INTRODUCTION 1.3 Packing Check List Item Remark AP-40AHD CPU Card 1 pc. 5-pin header to 5-pin header keyboard adapter cable 1 pc. 6-pin PS/2 Mini-Din to 5-pin AT Din keyboard adapter cable 1 pc, IDE/Floppy cable 1 set 1 x 34-pin female flat cable...

  • Page 10: Board Outline Of Ap-40Ahd

    AP-40AHD USER’S MANUAL 1.4 Board Outline of AP-40AHD COM1 COM2 PKB1 PMS1 KCN1 PRT1 VIA-II VT82C42 M1489...
  • Page 11 CHAPTER 2 : JUMPER SETTINGS & CONNECTORS The figure below shows the jumpers and connectors location for the AP-40AHD : COM1 PMS1 COM2 PKB1 KCN1 PRT1...

  • Page 12: Jumper Setting For Ap-40Ahd

    AP-40AHD USER’S MANUAL 2.1 Jumper Settings for AP-40AHD Jumpers are used to select the operation modes for your system.To set a jumper, a black cap containing metal contacts is placed over the jumper pin(s) according to the required configuration. A jumper is said to be “on” or “1-2” when the black cap has been placed on...
  • Page 13 JUMPER SETTINGS & CONNECTORS l JP5, JP6: CPU Voltage Select CPU Voltage Select 3.3 V (Default) 1-2, 3-4 1-2, 3-4 l JP7: DiskOnChip (ROM Disk) Address Select Address C8000 - CFFFF D0000 - D7FFF D8000 - DFFFF Note: Default is OFF; and a spare jumper is available at 1-2. l JP8: Select Watch-Dog Active Type Watch-Dog Active Type Reset System (Default)
  • Page 14 AP-40AHD USER’S MANUAL l JP10, JP11, JP12, JP13, JP14 : CPU Type Select CPU Type JP10 JP11 JP12 JP13 JP14 I486SX I486DX/DX2/ODP; AmDX4-V8T I486DX4-100SK051/SL-Enhance 1-2, 3-4 I486DX4-100SK096/SL-Enhance 1-2, 3-4 Am486DX2-V8T Am486DE2-66V8T 2-4, 3-5 1-2, 3-4 Write-Back Enhance CPU 2-4, 3-5 :...

  • Page 15: Connectors Description

    JUMPER SETTINGS & CONNECTORS 2.2 Connectors Description The connectors allow the CPU card to connect with other parts of the system. Some problems encountered with your system may be caused by loose or improper connections. Ensure that all connectors are in place and firmly attached. CONNECTOR FUNCTION COM1...

  • Page 16: System Status Indicate And Control Connectors

    AP-40AHD USER’S MANUAL 2.2.1 System Status Indicate and Control Connectors CONNECTOR PIN N0. DESCRIPTION RESET CONNECTOR Reset Signal POWER LED & KEYLOCK CONNECTOR Keylock Signal EXTERNAL SPEAKER Speaker Signal CONNECTOR HDD ACTIVE LED HDD ACTIVE # Signal CONNECTOR TURBO SWITCH...

  • Page 17: I/O Connectors Description

    JUMPER SETTINGS & CONNECTORS 2.2.2 I/O Connectors Description l KCN1 : 5 PIN HEADER KEYBOARD CONNECTOR (HEADER) PIN NO. DESCRIPTION Keyboard Clock Keyboard Data External Power Good Ground l PKB1 : PS/2 KEYBOARD CONNECTOR (Mini Din) PIN NO. DESCRIPTION Keyboard Data Ground Keyboard Clock l PRT1 : PARALLEL PORT CONNECTOR (HEADER)
  • Page 18 AP-40AHD USER’S MANUAL l COM2 : RS-232 PORT #2 CONNECTOR (D-Sub) PIN NO. DESCRIPTION Data Carrier Detect (DCD#) Receive Data (RXD) Transmit Data (TXD) Data Terminal Ready (DTR#) Ground (GND) Data Set Ready (DSR#) Request To Send (RTS#) Clear To Send (CTS#)
  • Page 19 JUMPER SETTINGS & CONNECTORS l PIDE1 : PCI IDE INTERFACE CONNECTOR (HEADER) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Reset# Ground Data 7 Data 8 Data 6 Data 9 Data 5 Data 10 Data 4 Data 11 Data 3 Data 12 Data 2 Data 13 Data 1...
  • Page 20 AP-40AHD USER’S MANUAL l FDC1 : FLOPPY INTERFACE CONNECTOR (HEADER) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Ground Density Select Ground Ground Ground Index# Ground Motor Enable A# Ground Drive Select B# Ground Drive Select A# Ground Motor Enable B# Ground...
  • Page 21 JUMPER SETTINGS & CONNECTORS l CN1, CN2: PC104 CONNECTOR PIN NO. DESCRIPTION ••~ ~ ••。 B ROW A ROW B ROW C ROW D ••~ ~ •• ¨ IOCHCK# 32••~ ~ •。 C RSTDRV SBHE# MEMCS16# ••~ ~ • ¨ CN2 1 LA23 IOCS16#...

  • Page 22: Chapter 3 : Award Bios Setup

    CHAPTER 3 : AWARD BIOS SETUP The Award’s ROM BIOS provides a built-in Setup program, which allows the user to modify the basic system configuration and hardware parameters. The modified data will be stored in a battery-backed CMOS RAM; so the acquired data will be retained even when the power is turned off.

  • Page 23: Cmos Setup Utility

    AWARD BIOS SETUP 3.2 CMOS Setup Utility The Main Program Screen appears as ... ROM PCI / ISA BIOS (2A4KDL79) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP SUPERVISOR PASSWORD CHIPSET FEATURES SETUP USER PASSWORD POWER MANAGEMENT SETUP IDE HDD AUTO DETECTION PCI CONFIGURATION SETUP...

  • Page 24: Standard Cmos Setup

    AP-40AHD USER’S MANUAL 3.3 Standard CMOS Setup Selecting “STANDARD CMOS SETUP” on the main program screen displays this menu: The Standard CMOS Setup Screen appears as ... ROM PCI / ISA BIOS (2A4KDL79) STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm : dd : yy) : Tue, Mar 25 1997 Time (hh : mm : ss) : 14 : 16 : 48 CYLS.
  • Page 25 AWARD BIOS SETUP Hard Disks : There are four hard disks listed: “Primary Master”, “Primary Slave”, For each IDE channel, the first device is the “Master” and the second device is “Slave”. Hard disk types from 1 to 45 are the standard ones. To select or change the configuration, move the cursor to the desired position and press <Page Up>...
  • Page 26 AP-40AHD USER’S MANUAL LBA mode : This is a Logical Block Addressing mode which is a HDD accessing method to overcome the 528 Megabytes restriction. The number of cylinders, heads and sectors that are shown in setup may not be the physical number contained in the HDD.
  • Page 27 AWARD BIOS SETUP Video : Select the type of primary video subsystem in your computer. The BIOS usually detects the correct video type automatically. The BIOS supports a secondary video subsystem, but you do not select it in Setup. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.

  • Page 28: Bios Features Setup

    AP-40AHD USER’S MANUAL 3.4 BIOS Features Setup Selecting the “ BIOS Features Setup ” and the Screen appears as... ROM PCI / ISA BIOS (2A4KDL79) BIOS FEATURES SETUP AWARD SOFWARE, INC Virus Warning : Disabled Video BIOS Shadow : Enabled...
  • Page 29 AWARD BIOS SETUP Quick Power On Self Test : The default setting is “ Enabled ”. If enabled, this will skip some diagnostic checks during the Power On Self Test (POST) to speed up booting process. Boot Sequence : The default setting is “ A, C, SCSI ”, the other option are “ A, C, SCSI, ” and “...
  • Page 30 AP-40AHD USER’S MANUAL C8000-CFFFF Shadow to D8000-DFFFF Shadow : The default setting for the shadow feature is “ Disabled ”. When enabled, the ROM with the specific address is copied into system DRAM. It will also reduce the size of memory available to the system.

  • Page 31: Chipset Feature Setup

    AWARD BIOS SETUP 3.5 Chipset Features Setup Selecting “ CHIPSET FEATURES SETUP ” and the Screen appears as ... ROM PCI / ISA BIOS (2A4KDL79) CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. Auto Configuration : Enabled AT-BUS Clock : CLK/4 DRAM Read Timing : Normal DRAM Write Timing : Normal...

  • Page 32: Power Management Setup

    AP-40AHD USER’S MANUAL 3.6 Power Management Setup The “Power Management Setup” controls the CPU card‘s “Green” features. Selecting “POWER MANAGEMENT SETUP” and the Screen appears as ... ROM PCI / ISA BIOS (2A4KDL79) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. Power Management...
  • Page 33 AWARD BIOS SETUP PM Control by APM: The default setting is “Yes”. If it is set to “No”, the system BIOS will wait for APM‘s prompt before it enters any PM mode. Note: If your system power management is controlled by APM and there is a task running, the APM will not prompt the BIOS to enter any power saving mode after time out.

  • Page 34: Pci Configuration

    AP-40AHD USER’S MANUAL 3.7 PCI Configuration Both the ISA and PCI use on the CPU card use system IRQs & DMAs. You must set up the IRQ and DMA assignments correctly through the PCI Configuration Setup utility,otherwise the CPU Card will not work properly.
  • Page 35 AWARD BIOS SETUP Resources Controlled By: The defaults setting is “Auto” which will control all IRQs automatically. The other option is “Manual” which allows you to control IRQs individually. IRQ Assigned to : If there is a legacy ISA device which uses an IRQ, set the corresponding IRQ to “...

  • Page 36: Load Setup Defaults

    AP-40AHD USER’S MANUAL 3.8 Load BIOS Defaults The BIOS defaults have been set by the manufacturer and represent settings which provide the minimum requirements for your system to operate. 3.9 Load Setup Defaults “LOAD SETUP DEFAULTS” loads optimal settings which are stored in BIOS ROM.

  • Page 37: Integrated Peripherals

    AWARD BIOS SETUP 3.10 Integrated Peripherals When you select the “INTEGRATED PERIPHERIALS” on the main program, the screen display will appears as: Integrated Peripheral Setup Screen ROM PCI / ISA BIOS (2A4KDL79) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. Onboard Parallel Port : 378/IRQ7 On-Chip Local Bus IDE : Enabled...
  • Page 38 AP-40AHD USER’S MANUAL IDE Primary Master PIO, IDE Primary Slave PIO: There are four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance.

  • Page 39: Supervisor/User Password

    AWARD BIOS SETUP 3.11 Supervisor/User Password The “SUPERVISOR/USER PASSWORD” uitlity sets the password. The CPU card is shipped with the password disabled. If you want to change the password , you must first enter the current password, then at the prompt enter your new password. The password is case sensitive and you can use up to 8 alphanumeric characters,press <Enter>...

  • Page 40: Hdd Low Level Format

    AP-40AHD USER’S MANUAL 3.13 HDD Low Level Format Selecting this option and pressing the <Enter> key enable you to perform low level format of hard disk drive. 3.14 Save & Exit Setup Selecting this option and pressing the <Enter> key to save the new setting information in the CMOS memory and continue with the booting process.

  • Page 41: Exit Without Saving

    AWARD BIOS SETUP 3.15 Exit Without Saving Selecitng this option and pressing the <Enter > key to exit the Setup Utility without recording any new values or changing old ones. The Screen appears as ROM PCI / ISA BIOS (2A4KDL79) CMOS SETUP UTILITY AWARD SOFTWARE, INC.

  • Page 42: Appendix A : How To Use Watch-Dog Timer

    APPENDIX A : HOW TO USE WATCH-DOG TIMER Enable and Retrigger the Watch-Dog timer: 443H Disable: 43H EX.1: For DOS Execute the DEBUG.EXE file under DOS, Then key-in i443. The system will reboot automatically according to the time-out you set. For example, if you want to Set 4 seconds for the time-out, you should set JP1 : 4L ON and JP8 : 1-2 ON to enable watch-dog timer.

  • Page 43: Appendix B : Technical Reference

    APPENDIX B : TECHNICAL REFERENCE I/O PORT ADDRESS MAP Address Function 000 - 01F DMA Controller #1 020 - 03F Interrupt Controller #1 040 - 05F Timer Chip Disable Watch-Dog Times Operation (Read) 060 - 06F Keyboard Controller 070 - 07F Read Time Clock/NMI Mask 080 - 09F DMA Page Register...

  • Page 44: Appendix C : Pc/104 Module Installation

    APPENDIX C : PC/104 MODULE INSTALLATION There are two steps to install the PC/104 module on AP-40AHD Single Board Computer. 1. Plug the Dual Side Male Connector into the PC/104 female connector. 2. Plug the PC/104 module‘s female connector into the AP-40AHD male connector.
  • Page 45 Terms and Conditions Date:1997.10.20 Warranty Policy 1. All products are warranted against defects in materials and workmanship for a period of two years from the date of purchase by the customer. 2. The buyer will bear the return freight charges for goods that are returned for repair within the warranty period whereas manufacturer will bear the return to user freight charges after repair.
  • Page 46 When requesting RMA service, please fill out this “RMA Service Request Form”. Without this form your RMA will be REJECTED!!! Reasons to Return: □ Repair(Please include failure details) □ Testing RMA No: Purpose Company: Contact Person: Phone No. Purchased Date: Fax No.: Applied Date: Return Shipping Address:...

Table of Contents