Advertisement
Table of Contents
ASSEMBLY INSTRUCTIONS
Item No: BD01911
*** Thank you for purchasing this quality product. Be sure to check all packing materials carefully
for small parts which may have come loose inside the carton during shipment. Identify and count all parts
and compare with parts list below.
*** Assemble product on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Read all instruction and study the drawings carefully before starting the assembly process.
IMPORTANT: Do not tighten bolts completely until all
bolts are completely lined up and inserted into holes
PAGE 1 OF 11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Acme Furniture BD01911
Summary of Contents for Acme Furniture BD01911
- Page 1 ASSEMBLY INSTRUCTIONS Item No: BD01911 *** Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts which may have come loose inside the carton during shipment. Identify and count all parts and compare with parts list below.
-
Page 2: Parts List
PARTS LIST HARDWARE LIST Q'Ty Q'Ty PART NAME DIAGRAM DIAGRAM PART NAME 2 pcs Upper Headboard Bolt: 6.3 x 80 (mm) 16 pcs Bottom Headboard Bolt 7 x 80 (mm) 2 pcs 8 pcs 3(R&L) Long Screw 7 x 50 (mm) Back panel 8 pcs 2 pc... - Page 3 Exploded View PAGE 3 OF 11...
- Page 4 STEP 1: UPPER HEADBOARB, GUADRAIL, RAILS ASSEMBLY 2 PLACES 4 pcs 4 pcs STEP 2: UPPER HEADBOARB, GUADRAIL, RAILS ASSEMBLY 1 PLACE 4 pcs 1 PLACE 2 pcs PAGE 4 OF 11...
- Page 5 STEP 3: UPPER FRONT RAIL ASSEMBLY 1 PLACES 1 pc 1 PLACES 2 pcs STEP 4: UPPER BED & BACK TOP LEG ASSEMBLY 1 PLACES 2 pcs PAGE 5 OF 11...
- Page 6 STEP 5: UPPER BED & GUARDRAIL & UPPER FRONT PANEL ASSEMBLY 1 PLACE 2 pcs 3 pcs 1 PLACE 2 pcs STEP 6: BOTTOM BED & RAIL ASSEMBLY 4 PLACES 8 pcs PAGE 6 OF 11...
- Page 7 STEP 7: FRONT BACK BOTTOM RAIL ASSEMBLY 1 PLACE 1 pc BOTTOM FRONT RAIL LEG ASSEMBLY STEP 8: 1 PLACE 1 pc PAGE 7 OF 11...
- Page 8 STEP 9: BOTTOM CENTER RAIL ASSEMBLY 1 PLACE 1 pc 1 PLACE 3 pcs STEP 10: UPPER & BOTTOM BED ASSEMBLY 4 PLACES 4 pcs PAGE 8 OF 11...
-
Page 9: Ladder Assembly
STEP 11: BACK LEG ASSEMBLY 1 PLACE 1 PLACE 6 pcs STEP 12: LADDER ASSEMBLY 2 PLACES 8 pcs PAGE 9 OF 11... - Page 10 STEP 13: LADDER & BED ASSEMBLY 4 PLACES 4 pcs STEP 14: UPPER & BOTTOM SLATS ASSEMBLY 56 PLACES 56 pcs PAGE 10 OF 11...
- Page 11 WARNING !!! To help prevent serious or fatal injuries from entrapment or falls: 1. Follow the information on the warning label appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. 2. Use only mattress which is 38-1/2" WIDE AND 75" LONG ON UPPER BUNK and LOWER BUNK. 3.
Need help?
Do you have a question about the BD01911 and is the answer not in the manual?
Questions and answers