Ae-Lock Button; Film Rewind Speed - Minolta DYNAX 7 User Manual

CUSTOM 10, 11, 12
Custom 10 - AE-Lock Button
• AEL appears in the viewfinder and
appears in the display when AE-lock button
is active (down).
• Slow sync is selected when the built-in flash
is up or an attached accessory flash is on.
• Manual shift is selected when the exposure
mode is set to manual.
1. Press to activate, release to cancel.
2. Press once to activate, press again to
cancel.
• Turning the built-in flash on or off cancels AE
lock.
168
To set custom functions;
1.Open control-panel door and press the CUSTOM button.
2.Turn the front control dial to select the desired custom function.
3.Turn the rear control dial to seclect the setting.
4.Press the shutter-release button partway down to enter the setings.
Refer to pages 154-157 for additional information.
Custom 11 - Bracketing Sequence
1. Metered exposure, Underexposure(s),
AE lock button
2. Underexposure(s), Metered exposure, Overexposure(s)
Custom 12 - Film Rewind Speed
1. Fast Rewind
Rewinds a 36-exposure roll in approximately 7
seconds.
2. Slow (silent) Rewind
Rewinds a 36-exposure roll in approximately
15.5 seconds.
Overexposure(s)
• A 5 frame bracket in 1/2EV increments is
exposed in the following order...
Normal -0.5EV +0.5EV
• A 5 frame bracket in 1/2EV increments is exposed in the following
order...
-1.0EV -0.5EV Normal
-1.0EV +1.0EV
+0.5EV +1.0EV
169