Subscribe to Our Youtube Channel
Related Manuals for Hoover ONEPWR FLOORMATE ELITE
Summary of Contents for Hoover ONEPWR FLOORMATE ELITE
- Page 1 USER GUIDE FLOORMATE ELITE CORDLESS HARD FLOOR CLEANER F18OPHF23J FLOORMATE ADVANCED CORDLESS HARD FLOOR CLEANER F18OPHF23N...
-
Page 2: Important Safety Information
• Only Hoover ONEPWR batteries and chargers should be used with this machine. • Only Hoover ONEPWR recommended tools and accessories should be used with this machine. - Page 3 • To reduce the risk of fire and electric shock due to internal component damage, use only Hoover® cleaning solutions intended for use with this appliance. • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
-
Page 4: Battery Safety Precautions
IMPORTANT SAFETY INFORMATION BATTERY SAFETY PRECAUTIONS • Replace the battery with a Hoover ONEPWR battery only. Use of another battery may present a risk of fire or explosion. • Do not attempt to disassemble the battery, remove any component projecting from the battery terminals and do not dispose of in a fire. -
Page 5: General Information
Mark DISTRIBUTED BY: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149, Australia Web Address: www.hoover.com.au Customer Careline: 1300 698 130 Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, East Tamaki, Auckland 2013, New Zealand Web Address: www.hoover.co.nz... -
Page 6: Machine Overview
MACHINE OVERVIEW TRIGGER (HIDDEN) POWER ON/OFF HANDLE BATTERY LEVEL INDICATORS DRY ROLLER INDICATOR TANK FULL INDICATOR SELF-CLEAN MODE BUTTON ROLLER MAIN UNIT SELF DIRTY WATER TANK RELEASE BUTTON DIRTY CLEAN TANK FULL FILTER (HIDDEN) SEPARATOR DIRTY WATER TANK BRUSH COVER RELEASE BUTTON BRUSHROLL BRUSHROLL COVER LED HEADLIGHTS... -
Page 7: Charging The Battery
Getting started CHARGING YOUR PRODUCT CHARGING THE BATTERY THIS MACHINE IS ONLY TO BE USED WITH HOOVER ONEPWR BATTERIES AND CHARGERS. PLEASE READ THE BATTERY AND CHARGER USER GUIDES BEFORE USE. NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery before first use may result in poor battery performance. - Page 8 GETTING STARTED ASSEMBLY THIS MACHINE IS ONLY TO BE USED WITH HOOVER ONEPWR BATTERIES AND CHARGERS. PLEASE READ THE BATTERY AND CHARGER USER GUIDES BEFORE USE. IMPORTANT: Test the machine over a small hidden area of your flooring before use. If no damage occurs, continue cleaning.
- Page 9 YOUR SOLUTIONS PICK UP HOOVER SOLUTIONS ® FOR PROVEN PERFORMANCE Replace the cap tightly and push the TO VIEW THE FULL HOOVER SOLUTIONS RANGE VISIT ® HOOVER.COM.AU / HOOVER.CO.NZ tank down firmly on to the machine. Quick Clean Deep Clean Dilution for your every day clean.
-
Page 10: Operation
GETTING STARTED OPERATION IMPORTANT: When the dirty water tank is full, the tank full light will illuminate and flash. Once the light is activated the machine will run for 5 seconds before switching off. Remove the dirty water tank and empty. NOTE: This cleaner is only intended for use on sealed hard floors. - Page 11 GETTING STARTED OPERATION NOTE: During use, when the machine is left ON whilst locked in the upright position, the machine will go into dry roller mode. After 5 seconds the machine will automatically switch off. Press the ON/OFF button to switch back on. 1.
-
Page 12: Cleaning And Maintenance
CLEANING AND MAINTENANCE ALWAYS SWITCH OFF THE MACHINE AND REMOVE THE BATTERY BEFORE CARRYING OUT ANY MAINTENANCE OR TROUBLESHOOTING. EMPTYING THE DIRTY WATER TANK IMPORTANT: When the dirty water tank is full, the tank full light will illuminate and flash. Once the light is activated the machine will run for 5 seconds before switching off. -
Page 13: Cleaning The Filter
CLEANING AND MAINTENANCE CLEANING THE FILTER IMPORTANT: Every 5-6 uses wash the filter with warm water (40°C max) and leave for 24 hours or until fully dry before refitting onto the machine. For prolonged storage the filter should be removed, cleaned and stored in the rinse storage tray. - Page 14 CLEANING AND MAINTENANCE MACHINE RINSE AND BRUSHROLL QUICK CLEAN (RECOMMENDED AFTER EVERY USE) Empty the tank into a sink or toilet. Unscrew the cap and fill to the small Replace the cap tightly and push the area clean marker with warm water tank down on to the machine (max 40˚C).
- Page 15 CLEANING AND MAINTENANCE REMOVING AND ADVANCED CLEANING OF THE BRUSHROLLS IMPORTANT: Make sure both the brushrolls and brushroll cover are fitted correctly. If fitted incorrectly this may cause poor water pick up. For best cleaning results, advanced cleaning of the brushrolls should be done every 5-6 uses.
- Page 16 CLEANING AND MAINTENANCE Clean the brushroll housing of any dirt To refit the brushrolls slide the end of the brushroll without the tab on to the spindle and debris. and then push the outer side in until it clicks. Slide the brushroll cover tabs behind the tabs on the base. Rotate and push closed Between uses the brushrolls can be until it clicks.
- Page 17 CLEANING AND MAINTENANCE CHECKING FOR BLOCKAGES AND ADVANCED CLEANING Lift to remove the water/solution tank Press down the dirty water tank release Squeeze the inlet tube release clips and from the back of the machine. button and pull the tank to remove. pull to remove.
- Page 18 CLEANING AND MAINTENANCE REMOVING AND CLEANING THE SQUEEGEE ASSEMBLY Lift to remove the water/solution tank Press down the dirty water tank release Lie the machine on its back. from the back of the machine. button and pull the tank to remove. 40°C Using a crosshead screwdriver, remove Lift the screw tabs and pull the...
-
Page 19: Troubleshooting
TROUBLESHOOTING WARNING: Always switch off the machine and remove the battery before performing any checks or maintenance. THERE IS AN ACCESSORY MISSING • Check the contents on the box to make sure the part is definitely included with your machine. WHY DOES THE MACHINE HAVE NO POWER? •... - Page 20 HOOVER.COM.AU HOOVER.CO.NZ...
Need help?
Do you have a question about the ONEPWR FLOORMATE ELITE and is the answer not in the manual?
Questions and answers