Minolta DIMAGE V - WINDOWS Software Instruction Manual page 9

Hide thumbs Also See for DIMAGE V - WINDOWS:

Table of Contents

INSTALLING SOFTWARE

. When serial port 1 (COM 1) will not be used to connect the

Dimâge V, change the port setting number.

1. Insert the "Dimâge V Image Control" CD-ROM

into the CD-ROM drive.

2. Select Run... from the Start button.

• The Run dialog box will appear.

3. Type D:\English\Disk1\Comport in the Open

drop-down list, then click on OK.

• The COM Port dialog box will appear.

4. Select the serial port that the Dimâge V is

connected to, then click on OK.

Table of Contents