Minolta DIMAGE V - WINDOWS Software Instruction Manual page 13

STARTING THE APPLICATION
• The QTIC Main Panel will appear after the "Connecting to the camera.
Please wait..." message is gone.
22
DIMMED OPTIONS
If the buttons, Capture, and Viewer... are dimmed (appear grey
instead of black and do not function when clicked), the camera is
either turned off or is not connected to the computer correctly.
Check the following points when the options are dimmed, then
quit and restart the application (p. 20).
• The Dimâge V is turned on.
• The serial cable has been securely plugged into both the camera
and the computer (pp. 8-9).
• An image memory card is in the camera.
• The camera has been connected to the correct serial port (p. 8).
If the the options are still dimmed after restarting, reinstall the
software.
. If only Viewer... is dimmed, there are no images on the image
memory card.
23