Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MB&F HOROLOGICAL MACHINE N6
Summary of Contents for MB&F HOROLOGICAL MACHINE N6
- Page 1 HOROLOGICAL MACHINE N°6...
-
Page 3: Table Of Contents
HOROLOGICAL MACHINE N°6 FUNCTIONS OPERATING INSTRUCTIONS - WINDING / TIME SETTING OPERATING INSTRUCTIONS - OPENING AND CLOSING THE TOURBILLON SHIELD WINDING BOX INFORMATION WINDING SYSTEM - LE CYLINDER... -
Page 4: Horological Machine N°6
HOROLOGICAL MACHINE N°6... -
Page 5: Functions
FUNCTIONS Hours Minutes Protective shield for the tourbillon... - Page 6 HOROLOGICAL MACHINE N°6...
-
Page 7: Operating Instructions - Winding / Time Setting
OPERATING INSTRUCTIONS WINDING Your watch is equipped with an automatic movement. If it has stopped, make sure Crown A is in Position 1 (pushed against the case) and wind the movement by turning the crown several times clockwise. TIME SETTING Pull Crown A «out»... - Page 8 HOROLOGICAL MACHINE N°6...
-
Page 9: The Tourbillon Shield
OPERATING INSTRUCTIONS OPENING AND CLOSING THE TOURBILLON SHIELD Turn Crown B and rotate clockwise or anti-clockwise; this will open and close the protective shield of the tourbillon. When closed, the shield blocks harmful rays (especially UV light) from prematurely oxidising the movement’s lubrication oils; for this reason we suggest you close it regularly. -
Page 10: Horizontal Position
1 - HORIZONTAL POSITION 2 - VERTICAL POSITION... -
Page 11: Winding Box Information
WINDING BOX INFORMATIONS Your timepiece comes in a winding box made especially for Horological Machine N°6. Please note that the winding box should be laid horizontally (1) to rewind your timepiece. IMPORTANT In order to avoid damage, when you remove your timepiece from the winding box, never take it out by holding the crowns, but always from the strap. -
Page 13: Winding System - Le Cylinder
WINDING SYSTEM – LE CYLINDER CHANGING THE BATTERIES a) Remove the watch holder (1) by unclipping it in line with LE CYLINDER. b) Using the special tool provided (2), unscrew the central screw (3) as shown. c) Remove the cover (4). d) Insert 4 AA lithium/alkaline 1.5V (LR6) batteries in the housings provided (5), ensuring that they are inserted the right way round check the markings on the battery housings. - Page 14 WINDING SYSTEM – LE CYLINDER N.B. The cycle will only begin if there is a watch on the watch holder Charge : The light flashes to indicate the level of charge. • 4x : Fully charged • 3x : >60% charge •...
- Page 15 WINDING SYSTEM – LE CYLINDER LE CYLINDER is supplied pre-configured, meaning that in the majority of cases it is operational without the user needing to change any settings. The pre-defined cycle is set as follows : • 15 minute wait •...
- Page 16 WWW.MBANDF.COM – PRINTED IN SWITZERLAND – JANUARY 2016...
Need help?
Do you have a question about the HOROLOGICAL MACHINE N6 and is the answer not in the manual?
Questions and answers