Advertisement
Quick Links
Advertisement
Related Manuals for MB&F Horological Machine No.2
Summary of Contents for MB&F Horological Machine No.2
- Page 1 HOROLOGICAL MACHINE N° 2 - SV...
- Page 3 Functions Operating instructions Removing strap Attaching strap...
- Page 4 HOROLOGICAL MACHINE N 2 – SV...
- Page 5 Functions Instantaneous jumping hour Concentric retrograde minutes Moon phase Concentric retrograde date...
- Page 6 HOROLOGICAL MACHINE N 2 – SV...
-
Page 7: Operating Instructions
Operating instructions Date setting The crown has 3 positions: “In” position = Normal position when wearing the watch and winding crown clockwise. Intermediate position = Slide the crown to the first notch and turn the crown clockwise to the correct date. Slide the crown back against the case when finished. - Page 8 HOROLOGICAL MACHINE N 2 – SV...
- Page 9 Time setting “Out” position = Fully slide the crown out and turn the crown clockwise to the correct time. Slide the crown back against the case when finished. Your watch is equipped with an automatic movement. If it has stopped, check that the crown is fully in (position 1) and wind it a few turns clockwise.
- Page 10 Adjusting the moon phase To adjust the moon phase, gently position the supplied tool in the corrector hole, which is located on the left-hand side of the case. To avoid damaging the moon phase gear train, do not adjust the moon phase between 9 pm and 2 am.
- Page 11 To change the strap – Removing strap Remove the screw on the right-hand lug by turning anticlockwise with the supplied screwdriver.
- Page 12 Remove the screw on the left-hand lug by turning anticlockwise with the supplied screwdriver.
- Page 13 Push the central pin out from between the strap and the lugs and remove the strap. Repeat steps 1-3 on the other side of the case.
- Page 14 To change the strap – Attaching strap Place the new strap between the lugs and slide the central pin through lugs and strap. Screw-in the right-hand screw in the lug by turning the screwdriver in a clockwise direction.
- Page 15 Screw-in the left-hand screw in the lug by turning the screwdriver in a clockwise direction. Repeat steps 1-3 on the other side of the case.
- Page 16 WWW.MBANDF.COM - PRINTED IN SWITZERLAND - MARCH 2010...
Need help?
Do you have a question about the Horological Machine No.2 and is the answer not in the manual?
Questions and answers