Page 3
CONGRATULATIONS You have just adopted T-Rex, an advanced timepiece born from the partnership between La Manufacture L’Épée 1839 and MB&F. T-Rex has been developed with passion and care by the Master Watchmakers of L’Epée 1839 in Delémont, Switzerland.
IMPORTANT INFORMATION Please be very careful to never touch the movement of T-Rex either on the front, on the sides or on the back of the movement, except the time adjustment and the winding tips that can be touched with the winding key. Furthermore, the movement should never be in contact with any liquids –...
CARE AND MAINTENANCE Use only a soft and dry cloth to clean the clock. Dust and particles contained in the cloth could scratch parts. Do not use any kind of cleaning products to wipe the clock. It is recommended to keep the clock distant from any source of heat or vibrations.
WINDING THE MOVEMENT Insert the key at the back of the piece, on the axis of the barrel. The movement should be fully wound every 8 days. Be sure to wind up the spring completely. Wind T-Rex until you feel that the necessary force increases significantly; do not wind further as this is the sign that the movement is fully wound.
Need help?
Do you have a question about the L'Epee 1839 T-REX and is the answer not in the manual?
Questions and answers