Resetting To The Default Settings - Minolta DIMAGE 2330 Instruction Manual

RESETTING TO THE DEFAULT SETTINGS

This allows you to reset all the settings of this camera to the default at a time.
The camera settings
Flash mode (see page 41)
Exposure compensation value (see page 55)
Focus mode (see page 36)
Drive mode (see page 45)
White balance (see page 65)
Image quality (see page 60)
Image size (see page 63)
Sharpness (see page 68)
The interval for the slide show mode
(see pages 82, 83)
The direction of playback for the slide show
(see pages 82, 83)
The brightness of the LCD monitor
(see page 110)
The time for the auto power off function
(see page 112)
The beep sound (see page 120)
The default settings
Autoflash with red-eye
reduction
0
AF (Autofocus)
Single shot
AUTO
STD. (Standard)
FULL (Full size)
NORMAL
3 seconds
FORWARD
5
3 MIN. (minutes)
ON (The beep sounds)
Rotate the function dial to
and slide the power switch to
turn on the camera.
• The power switch returns to the
initial position.
Rotate the function dial to
"SETUP".
• The setup mode menu is displayed
on the LCD monitor as shown in the
figure.
- 126 -