Table of Contents
Advertisement
* After replacing the batteries, check that the built-in clock (date and time) works
correctly (see page 116).
If neither AC adapter nor batteries are used more than 5 minutes, the built-in
clock may delay or be reset to the default setting. In this case, set the date and
time again by following the procedure described on page 116.
* Do not place the camera with the battery-chamber door facing down when the
battery-chamber door is open. Doing so may damage the battery-chamber
door.
* As the batteries become hot right after the camera is operated, be careful
when replacing the batteries.
INSERTING THE BATTERIES - CONT'D
Close the battery-chamber door in
the direction of the arrow
slide it until it clicks
- 25 -
and
.
Advertisement
Table of Contents
