Related Manuals for SCHUNK APS-M1S
Summary of Contents for SCHUNK APS-M1S
- Page 1 Assembly and Operating Manual APS-M1S Analog position sensor Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK SE & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 1605606 Version: 01.00 | 15/10/2024 | en...
-
Page 3: Table Of Contents
7 Declaration of conformity ............... 14 8 UKCA Declaration of Conformity ..............15 9 Information on the RoHS Directive, REACH Regulation and Substances of Very High Concern (SVHC) ..................16 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 4: General
If the product is used as intended, the warranty is valid for 24 months from the ex-works delivery date under the following conditions: Observe the applicable documents, } 1.1.2 [/ 4] Observe the ambient conditions and operating conditions, } 2.3 [/ 5] 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 5: Basic Safety Notes
If the personnel working with the product is not sufficiently qualified, the result may be serious injuries and significant property damage. All work may only be performed by qualified personnel. 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... - Page 6 Before working with the product, the personnel must have read and understood the complete assembly and operating manual. Observe the national safety regulations and rules and general safety instructions. 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606...
-
Page 7: Warranty
If the product is used as intended, the warranty is valid for 24 months from the ex-works delivery date under the following conditions: Observe the applicable documents, } 1.1.2 [/ 4] Observe the ambient conditions and operating conditions, } 2.3 [/ 5] 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 8: Technical Data
Ambient temperature [°C] Min. - 20 Max. + 80 Nominal voltage [VDC] Min. Max. IP rating More technical data is included in the catalog data sheet. Whichever is the latest version. 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 9: Notes On Operation
The sensor system can be influenced by external forces such as vibrations or high accelerations. For dynamic applications (e.g. robot applications), SCHUNK recommends signal evaluation only when the module is stationary for accurate measurements. 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 10: Assembly And Settings
In sensor rest position, the sensor rod is not actuated. Free stroke Measuring path Lower range value Initial stroke Lower range value Resting position Initial stroke description 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 11: Electrical Connection
If the length of the sensor cable is insufficient: Solder the enclosed connector to the cable ends of the extension. The cable extension should be no longer than necessary and as short as possible. 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 12: Installing And Connecting The Sensor
10 m Fit the cable ends of the sensor or extension cable with wire end sleeves. Connect the sensor to the electronic processor (see electronic processor operating manual). 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 13: Mount The Connector To The Sensor Cable
Push the cable (5) into the connector (1). Observe the guides on the half-shells and the collet chuck. Screw the clamping nut (4) onto the connector (1) and tighten. ð Tightening torque: 0.6 Nm 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 14: Declaration Of Conformity
Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, October 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 15: Ukca Declaration Of Conformity
Marcel Machado, address: refer to manufacturer's address Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, October 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606... -
Page 16: Information On The Rohs Directive, Reach Regulation And Substances Of Very High Concern (Svhc)
"on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)", or fulfill their intended function only as part of one. Therefore products from SCHUNK do not fall within the scope of the directive at this time. REACH Regulation Products from SCHUNK fully comply with the regulations of Regulation (EC) No. 1907/2006... - Page 17 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606...
- Page 18 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606...
- Page 19 01.00 | APS-M1S | Assembly and Operating Manual | en | 1605606...
- Page 20 SCHUNK SE & Co. KG Spanntechnik | Greiftechnik | Automatisierungstechnik Bahnhofstr. 106 - 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the APS-M1S and is the answer not in the manual?
Questions and answers