Related Manuals for SCHUNK FPS-S M8
Summary of Contents for SCHUNK FPS-S M8
- Page 1 Assembly and Operating Manual FPS-S M8 Flexible position sensor Translation of Original Operating Manual...
- Page 2 Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK SE & Co. KG. All rights reserved. Technical changes: We reserve the right to make alterations for the purpose of technical improvement. Document number: 1595949 Version: 01.00 | 05/06/2024 | en...
-
Page 3: Table Of Contents
6 Translation of the original declaration of conformity........12 7 UKCA Declaration of Conformity ..............13 8 Information on the RoHS Directive, REACH Regulation and Substances of Very High Concern (SVHC) ..................14 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 4: General
Observe the ambient conditions and operating conditions, } 2.3 [/ 6] 1.3 Scope of delivery The scope of delivery includes Flexible position sensor FPS-S M8 in the version ordered Assembly and Operating Manual 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 5: Accessories
Attachment kit, see catalog or operating manual for the gripper For information regarding which accessory articles can be used with the corresponding product variants, see catalog data sheet. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 6: Basic Safety Notes
Structural changes should only be made with the written approval of SCHUNK. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 7: Personnel Qualification
Before working with the product, the personnel must have read and understood the complete assembly and operating manual. Observe the national safety regulations and rules and general safety instructions. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 8: Technical Data
Max. IP rating More technical data is included in the catalog data sheet. Whichever is the latest version. CAUTION Can only be used in conjunction with FPS-F5 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 9: Assembly And Settings
(e. g., nitric acid, chromic acid and sulfuric acid). Ferromagnetic components, e.g. adapter plates made of construction steel, change the switching positions of the sensor. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 10: Electrical Connection Fps-S M8
Push the sensor (1) through the clamping holder (2) until it stops in the housing. Tighten the screws on the clamp holder (2). Connect the sensor (1) to the evaluation electronics and fasten the cable. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 11: Troubleshooting
10 mm. NOTE If these steps do not eliminate the problem, contact SCHUNK Service for troubleshooting. 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 12: Translation Of The Original Declaration Of Conformity
Requirements for proximity devices with analogue output (IEC 60947-5-7:2003) Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, May 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 13: Ukca Declaration Of Conformity
Marcel Machado, address: refer to manufacturer's address Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, May 2024 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949... -
Page 14: Information On The Rohs Directive, Reach Regulation And Substances Of Very High Concern (Svhc)
"on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)", or fulfill their intended function only as part of one. Therefore products from SCHUNK do not fall within the scope of the directive at this time. REACH Regulation Products from SCHUNK fully comply with the regulations of Regulation (EC) No. 1907/2006... - Page 15 01.00 | FPS-S M8 | Assembly and Operating Manual | en | 1595949...
- Page 16 SCHUNK SE & Co. KG Spanntechnik | Greiftechnik | Automatisierungstechnik Bahnhofstr. 106 - 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the FPS-S M8 and is the answer not in the manual?
Questions and answers