Download Print this page

Arkon MOUNTS Slim-Grip TAB-CM117 Manual

Tablet holder with dashboard mount

Advertisement

Quick Links

TAB-CM117 | Slim-Grip® Tablet Holder with Dashboard Mount
TAB001
Install the holder to the mounting pedestal
Insert the Dual T-Tab head of the pedestal to the back of the
holder. Then, slide the holder upwards to ensure it is securely
in place.
Installing the legs to the holder
Install the support legs required based on the
recommendations listed above. Slide the support legs into
the holder's support leg channels.
WARNING
CHOKING HAZARD - Keep out of reach from children under 8 yrs. as they can choke or suffocate on parts included with this system
WARNING
Arkon® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon® products near areas that intefere with operation
of vehicles. Arkon® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon® is not responsible for any damages caused to vehicles,
product, or people due to the installation or use of this product.
CM117-SBH
XACP
Includes:
1 – Slim-Grip® Tablet Holder with Support Legs (TAB001)
1 – Long Arm Dashboard Pedestal with Dual-T Adapter (CM117-SBH)
1 – Alcohol Pad (XACP)
Important: Clean the application surface and make sure it is free of dirt, dust, and grease
before installation.
Please note the TAB001 packaging includes:
5 - Support Stoppers (SP-TABS5PK) - Optional
Leg selection guide
Recommended legs to use based on tablet with or without a case
- For tablets size min 6" to 8.25" max we recommend using 4 small legs
- For tablets size min 6.75" to 9.12" max we recommend using 2 small legs and 2 medium legs
- For tablets size min 8.31" to 10.75" max we recommend using 2 medium legs and 2 large legs
- For tablets size min 9.12" to 11.50" max we recommend using 4 large legs
Remove the protective film from the mount
Peel off the clear protective sheet from the base, then firmly
press the suction cup base onto the adhesive disk. Secure the
suction cup in place by flipping the lever downward to lock it.
Extend the spring-loaded mechanism
To extend the legs, insert one end of the tablet into the
bottom support legs.
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm PST
Push down to
mount tablet
Need assistance?
arkon.com
Scan to email our
Designed in USA
Arkon® customer
©Arkon Resources, Inc.
Continued on page 2
service team.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MOUNTS Slim-Grip TAB-CM117 and is the answer not in the manual?

Questions and answers

Summary of Contents for Arkon MOUNTS Slim-Grip TAB-CM117

  • Page 1 WARNING Arkon® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon® products near areas that intefere with operation of vehicles. Arkon® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon® is not responsible for any damages caused to vehicles, product, or people due to the installation or use of this product.
  • Page 2 WARNING Arkon® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon® products near areas that intefere with operation of vehicles. Arkon® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon® is not responsible for any damages caused to vehicles, product, or people due to the installation or use of this product.

This manual is also suitable for:

Mounts slim-grip tab001Mounts slim-grip cm117-sbhMounts slim-grip xacp