Belkin USB 2.0 FLASH DRIVE User Manual page 13

Using the Software (Belkin U-Storage)
On Windows Platform
Notes:
• The "Driver for Windows 98/SE" will be required to install, as the device is
connected to the PC through the USB port for the fist time when operation is
made under Windows 98/98SE system. After that, the drive installation is no
more required in future uses.
• Do not cancel the installation during the procedure.
The Belkin USB Flash Drive may not operate correctly if the installation is
incomplete.
• Read the "Troubleshooting" Section if the installation cancels itself during the
procedure, if the installation did not proceed as described, or if you feel that the
driver are not properly installed
Installing the USB Driver:
For some Windows system, users should log in as the Administrator before
installation. Once you have inserted the Belkin USB Flash Drive into the computer,
under Windows ME/2000/XP, the OS will find the appropriate driver or the "Add
New Hardware Wizard" dialog will appear after a moment. In Windows 98/98SE,
you can do the installation of the driver manually; just place the "Driver & Tools" CD
into the CD-ROM drive in the computer and click on "Driver for Windows 98/SE "
when the "Driver & Tools" installation menu pops up. Follow along the instructions,
the driver will then be installed.
During the installation procedure, if the "Digital Signature Not Found" message
displays, just click the [Yes] button in the showing window.
Using "Belkin U-Storage" Program for the First Time:
Warnings: Because the "Belkin U-Storage" program can only handle one
Belkin USB Flash Drive at the same time. If you don't want to use
the functions of the "Belkin U-Storage", like [Resize], [Change
Password], or [Log In], etc., you can insert more than two Belkin
USB Flash Drives. If you want to use the functions of the program,
remove all other Belkin USB Flash Drives. Otherwise, the "Belkin
U-Storage" may not perform properly or even cause data loss.
12
1
2
3
4
5
6
7
8
9
10
11