Wall-mount bracket, compatible tv models for this wall-mount bracket information: kdl-52nx807/kdl-52nx800/kdl-46nx807/kdl-46nx800/kdl-46nx705/kdl-40nx705/kdl-46nx700/kdl-40nx700 (6 pages)
Page 1
Installasjonsveiledning 安裝資訊 Thông tin Lắp đặt Πληροφορίες εγκατάστασης Montaj Bilgileri ข้้ อ มูู ล การติิ ด ติ้ � ง Szerelési információk Informasi Pemasangan Instalační informace הוראות התקנה Informácie týkajúce sa montáže معلومات الترکيب اطالعات نصب Informaţii de instalare J-065-100-12(1) SU-WB1...
Page 2
Installation Information for Using Sony Sound Bar Bracket (SU-WB1) To use the SU-WB1 Sound Bar Bracket, you need to attach it to the SU-WL905 or SU-WL900 Wall-Mount Bracket, which is sold separately. Whether the SU-WB1, SU-WL905 or SU-WL900 can be attached depends on your TV’s or LCD Monitor’s specifications.
Page 3
Monitor with Sound Bar may fall and Sound Bar Bracket. ˎ The TV or LCD Monitor with Sound Bar may cause serious injury. Sony is not liable for fall and cause a serious injury such as a If you do so, the Sound Bar Bracket may any damage or injury caused by bruise or a fracture.
Page 4
WARNING the Sound Bar. The following instructions are for Sony dealers only. Be sure to read safety precautions described above and pay special attention to safety during the Be sure to assemble the...
For this reason, the illustrations may appear different from your actual TV or LCD Monitor with Sound Bar. Checking the Parts Supplied with SU-WB1 ˎ Verify that all the parts are included. (×4) (×18) (×2)
Preparing for Installation ˎ Have the Sound Bar Bracket Safety Information and Sound Bar Bracket Installation Guide at hand before installation. ˎ Prepare the following tools: 1.5 N·m {15 kgf·cm} − 6 (EN) −...
Page 7
Set the length of Installing the Sound Bar Attach the screws Bracket to the Wall-Mount according to the table. Bracket Attach using Set the length of Refer to the table. HT-A9000 HT-A8000 35 ~ 50 55 ~ 60 55 ~ 65 HT-A5000 85 ~ 95...
Page 8
Note ˎ Be sure to insert the end of into the slot of ˎ Adjust the position required for your Sound Bar before fixing the screws. Attach to the Wall-Mount Bracket. Note ˎ Be sure to insert the end of into the slot of the Wall-Mount Bracket.
Page 9
HT-A9000 / A8000 only Installing the Sound Bar on Use the Wall Mounting Bracket supplied the Wall with HT-A9000 / A8000. Connect the cables from the TV or LCD Monitor to the Sound Bar. HT-A5000 only Attach ...
Page 10
Attach the Sound Bar to the Route the cables for the TV or Sound Bar Bracket. LCD Monitor and Sound Bar. HT-A9000 / A8000 / A5000 only HT-A3000 only − 10 (EN) −...
Page 11
Attach Secure the Sound Bar. HT-A9000 / A8000 only • Use screws supplied with HT-A9000 / A8000. HT-A5000 only − 11 (EN) −...
Confirming the Completion of the Installation Check the following points. ˎ The cord and the cable are not twisted or pinched. WARNING ˎ Improper placement of the AC power cord (mains lead), etc. may cause fire or electric shock through a short circuit.
Specifications Dimension: (Approx.) [mm] a : 1 114 b : 565 c : 358.5 d : 309 e : 13 f : 18 Mass (base only): (Approx.) [kg] Design and specifications are subject to change without notice. − 13 (EN) −...
Need help?
Do you have a question about the SU-WB1 and is the answer not in the manual?
Questions and answers