Setting Wpa/Wpa2-Personal (Psk) - Belkin F5D8235-4 User Manual

UsINg THe Web-based adVaNCed UseR INTeRfaCe
sections
table of contents

setting WPa/WPa2-Personal (PsK)

Like WPA security, WPA2 is available in both WPA2-Personal (PSK)
mode and WPA2-Enterprise (RADIUS) mode . Typically, WPA2-Personal
(PSK) is the mode that will be used in a home environment, while WPA2-
Enterprise (RADIUS) is implemented in a business environment where
an external radius server distributes the network key to the clients
automatically . Your Router supports WPA2-Personal (PSK) .
1� After you've set up your Router, go to the "Security" page under
"Wireless" and select "WPA-PSK(no server)" from the "Security Mode"
drop-down menu .
2� For "Authentication", select "WPA-PSK", "WPA2-PSK", or "WPA-
PSK + WPA2-PSK" . This setting will have to be identical on the wireless
clients that you set up . "WPA-PSK + WPA2-PSK" mode will allow the
Router to support clients running either WPA or WPA2 security .
3� For "Encryption Technique" will auto-fill depending on the
authentication type above . This setting will have to be identical on the
wireless clients that you set up .
4� Enter your pre-shared key (PSK) . This can be from eight to 63
characters and can be letters, numbers, or symbols . This same key must
be used on all of the wireless clients that you set up . For example, your
PSK might be something like: "Smith family network key" . Click "Apply
Changes" to finish . You must now set all wireless clients to match these
settings .
N+ Wireless Router
1 2 3 4 5 6
IMPoRTaNT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to the
Router .
43
7 8 9 10