REFLEX ACTIVE 40 Series Getting Started

POWER ON / OFF
• To switch on the watch, press and hold the crown until the display is on.
• Switch off by long pressing the crown, or through the settings/more functions.
HOW TO CHARGE
1. Line up the 2 pins to the charging spots on the back of the watch case. The pins are magnetic and will
secure the charger in place.
2. Plug in the USB cable to a power source. Once connected, a charging icon will appear on screen.
• Please charge the watch when it displays low battery.
• Charging usually takes 3 hours to fully charge your smartwatch, please take case not to over charge.
BUTTON OPERATIONS
Short pressing the crown: Long pressing the side button:
• Unlocks the screen • Turns on / off the watch
• Takes you through the menu • You can also switch off the watch through the settings
CONTROL CENTRE
SWIPE DOWN
SWIPE LEFT
SWIPE RIGHT
SMART MENU
SWIPE DOWN
NOTIFICATIONS
BLUETOOTH CONNECTION CALLING FUNCTION
After connecting the smart watch to your phone, you can use the microphone and built in speaker in the
watch to make and answer calls. You can also view the call history on the watch.
Note: You need to retain the connection between the watch and the phone when using the phone call function.
HOW TO CONNECT
1. After connecting the watch to the REFLEX ACTIVE BLUE app, you will be prompted to accept wireless
connection, please accept.
2. Go to your watch and swipe right to the menu and locate the phone function.
Note: The battery lasts for 3 to 4 days with Bluetooth calling mode enabled. On standby the battery can last for
approximately 10-15 days.
Series 40 - getting started
Please take a few minutes to read through these instructions,
they will help ensure you get the best from your smartwatch. You
can also visit our website or scan this QR code for lots of helpful
information and video guides. And of course, if you have any
questions, please get in touch, we're here to help!
www.reflex-active.com/pages/support
%
SWIPE UP
SWIPE LEFT
SWIPE RIGHT
FEATURES
SWIPE UP
DOWNLOADING THE REFLEX ACTIVE BLUE App.
To download our app, search for REFLEX ACTIVE BLUE App . or scan the appropriate QR code with your smart
phone camera.
COMPATIBILITY
The REFLEX ACTIVE BLUE app will work on the following smartphones:
•
Android (version 9.0 and above)
•
Apple IOS (version 12.0 and above)
CONNECTING YOUR SMART WATCH TO MOBILE PHONE
1. Enable bluetooth connection on your smart phone.
2. Open the REFLEX ACTIVE BLUE APP on your smart phone.
3. Set your preferences and follow the set up guide.
4. To connect your watch, open device section at the bottom of the app & select 'add
device' & select Series 40.
5. A unique 6 digit pairing code will be displayed on the watch & phone screen. If the codes match, accept
and complete the setup.
- Allow permissions when prompted to gain full functionality of your watch.
DISCONNECTING YOUR SMART WATCH & PHONE
1. Open the REFLEX ACTIVE BLUE APP on your smart phone.
2. Tap disconnect watch at the top of the device section of app.
ADD CONTACTS
You can add up to 8 contacts to your watch. Add contacts from the REFLEX ACTIVE BLUE app. To add
contacts go to "favourite contacts" and add contacts. The selected contacts will then be synced to your
watch.
WIRELESS CONNECTION CALLING FUNCTION
HOW TO DISCONNECT
Switch between watch / phone during an active call: If your watch is connected to your phone via wireless
connection, all calls will show up on the watch by default. If during a call you would like to switch to your
phone, simply tap on the handset earpiece icon to select it, the call will then switch to your phone.
HOW TO DISCONNECT
To disconnect BT connection
calling, go to the phone's BT
setting and "unpair" the
"REFLEX ACTVIE 40". There is
also a shortcut to temporarily
switch this off on the settings
page.