REFLEX ACTIVE 02 Series Getting Started

TOUCH
BUTTON
HOW TO CHARGE
1. Line up the 2 pins to the charging spots on the back of the watch case.
2. Once in place, use the clamp to secure.
3. Plug in the USB cable to a power source. Once connected, a charging icon will appear on screen.
4. Please charge the band when it displays low battery.
5. A 2 hour chrge time is sufficient to fully charge your smartwatch, please do not exceed a 2 hour charge period.
OPERATION INTRODUCTION
• You can twist your wrist or press the touch key to illuminate the screen.
• Press the touch key to switch main menu interface.
• Long press the touch key to confirm actions.
• To switch off the watch, press the touch key repeatedly until "more" icon shows on the display and then long
press to enter in "Power off", long press the touch key again.
You can set the gesture control style on the REFLEX ACTIVE App. within advanced settings. Twisting your wrist
will illuminate the screen.
GETTING TO KNOW THE SCREENS
TIME SCREEN There are 6 different time screens to select from, press & hold touch key to select the
one you prefer.
MESSAGES Press the touch button to switch to the message interface. Press the touch button to
enter the message view. The smartwatch will alert you to incoming calls, SMS, Wechat and Whatsapp
message notifications.
ABOUT Long press the touch button, you can check your bands address, device name and system
version.
KEEP ACTIVE From advanced setting within the App. you can set reminders to ensure you stay active
throughout the day.
ALARMS & ALERTS From reminder at the bottom of the home screen of the App., you can add
additional reminders such as wake up alarms, medication alerts etc.
SLEEP From settings & goals you can set a sleep target. Access your sleep data via today at the
bottom of the home screen of the App.
WEATHER After connecting with the REFLEX ACTIVE app, you can select city in advanced settings of
the app. and the weather of this city will be displayed on your smartwatch.
FIND YOUR PHONE OR SMARTWATCH Once the smartwatch is connected to the App., the find
phone feature will be available. Access via sub menu and then more. Long press the touch key and
your phone will sound a locator alarm. To find your tracker from your phone, select find device from
settings menu.
Please note: Your REFLEX ACTIVE tracker will reset every day at midnight. Data is stored on the tracker for 7 days. For best results, ensuring activities and a full history are recorded, we recommend you sync your tracker to the App. daily.
series 02 - getting started
Please take a few minutes to read through these instructions,
they will help ensure you get the best from your smartwatch. You
can also visit our website or scan this QR code for lots of helpful
information and video guides. And of course, if you have any
questions, please get in touch, we're here to help!
www.reflex-active.com/pages/support
DOWNLOADING THE REFLEX ACTIVE App.
COMPATIBILITY
The REFLEX ACTIVE app will work on the following smartphones:
•
Android (version 4.4 and above)
•
Apple IOS (version 8.0 and above)
Please ensure the app is the latest version and has Bluetooth 5.0
CONNECTING BAND TO MOBILE PHONE
1. Enable Bluetooth on your smart phone.
2. Open the REFLEX ACTIVE App. on your smart phone.
3. Review and accept privacy policy.
4. Set your profile following the steps presented.
5. Set your goals following the steps presented.
6. To connect your watch, tap the green icon & select your watch from the list.
7. Tap OK to allow notifications to appear on your smartwatch.
Visit our SUPPORT section to view our video guide.
DISCONNECTING YOUR SMART WATCH & PHONE
1. Open the REFLEX ACTIVE App. on your smart phone.
2. Tap disconnect device in Settings.
3. Forget your device on your smart phones Bluetooth settings.
MORE Long press the touch button to enter the function menu. There is an About, Power Off & Find
Your Phone option.
DRINK ALERTS From advanced setting within the App. you can set reminders to ensure you stay
hydrated throughout the day.
CAMERA CONTROL Once connected to the App., access the photo feature via settings. By selecting
'take photo', you can take a photo on your phone by pressing the touch button on your band. It will
automatically save to your phone on Android devices, or the option to save/retake on iOS devices.
STEP COUNTER The band will record your daily activity automatically. Press the
touch key to switch between steps, calories & distance.
SPORTS Long press the touch screen button to enter more exercise functions.
There are four sports options:
You can choose the mode you need, after your activity, the band will record your sports data. After your exercise,
press the touch screen to stop & save your movement. If the activity lasts less than one minute, the data will not
record. From settings & goals in your App. you can set activity goals.
POWER OFF Long press the touch button to turn off your band.
RESET Long press the touch key, your watch will be reset and restart.
To download our app, search for REFLEX ACTIVE App .
or scan the appropriate QR code for installation. Use
your smart phone camera or QR code reader app.
• Walk • Running • Cycling • Climbing