REFLEX ACTIVE 14 Series Getting Started

HOW TO CHARGE
1. Line up the 2 pins to the charging spots on the back of the watch case.
2. The pins are magnetic and will secure the charger in place.
3. Plug in the USB cable to a power source. Once connected, the charging icon will appear on screen.
4. Please charge the band when it displays low battery.
5. A 2 hour charge time is sufficient to fully charge your smartwatch. Please ensure you do not exceed a 2
hour charge period.
POWER ON / OFF
• To switch on the watch, press and hold the side button until the display is on.
• Switch off - By long pressing the side button, or through the settings/more functions.
BLUETOOTH CALLING FUNCTION
This watch comes with a special Bluetooth calling feature. You can make calls without having to unlock the phone.
You can also view your call history. The connection between the watch and your phone will need to be kept stable
when using the calling function.
The watch also has a microphone and a built in speaker for use when making phone calls, listening to music and
other notifications. Follow the steps to activate the calling function and much more:
PART A HOW TO CONNECT
• Step 1: After connecting the watch to the REFLEX ACTIVE RED app, you need to go to the Bluetooth settings of
the phone and pair the watch.
Android & IOS: Switch on Bluetooth in your phones Bluetooth settings and you should see the available device as
"Audio-Series 14" or "Audio-Series 15" depending on your system. Tap on the device name and accept the Bluetooth
pairing request. To have full functionality we recommend allowing permissions.
Once connected you should see that the device is "connected for calls".
• Step 2: Go to your watch and swipe left to the features page and locate the phone function.
There are three tabs on this screen:
• Recent calls
• Dial pad
• Contacts
If you tap on the recent calls tab you can see the recent calls on your device.
0 770 090 020 2
When you tap on the dial pad you can then dial a number to call. Once you have dialed
the number the call button on the bottom right corner will appear.
Series 14/15 - getting started
Please take a few minutes to read through these instructions,
they will help ensure you get the best from your smartwatch. You
can also visit our website or scan this QR code for lots of helpful
information and video guides. And of course, if you have any
questions, please get in touch, we're here to help!
www.reflex-active.com/pages/support
DOWNLOADING THE REFLEX ACTIVE RED App.
To download our app, search for REFLEX ACTIVE RED App . or scan the appropriate QR code
for installation. Use your smart phone camera or QR code reader app.
COMPATIBILITY
The REFLEX ACTIVE RED app will work on the following smartphones:
•
Android (version 5.0 and above)
•
Apple IOS (version 9.0 and above)
Please ensure the app is the latest version and has Bluetooth 5.0
CONNECTING YOUR SMART WATCH TO MOBILE PHONE
1. Enable Bluetooth on your smart phone.
2. Open the REFLEX ACTIVE RED App. on your smart phone.
3. To connect your watch, tap on the "add a device" green icon & select your watch from the list.
Please note: You'll need to connect for calling to be enabled. See instructions below.
DISCONNECTING YOUR SMART WATCH & PHONE
1. Open the REFLEX ACTIVE RED App. on your smart phone.
2. Tap disconnect device in Settings.
3. You must also forget your device on your smart phones Bluetooth settings.
Once you tap on the call button the number will then be called.
• You can speak through the in built microphone on your watch.
• To adjust the speaker volume tap on the + or -
• To end the call tap on the red phone icon
Incoming Call
When Bluetooth calling mode is activated the watch will ring and vibrate. You can
answer or reject the call.
Please note: Internet calls such as Whatsapp will show as notification only.
PART B HOW TO DISCONNECT
To disconnect Bluetooth calling, go to the phone's Bluetooth setting and "unpair" the "Audio-Series 14/15". There is
also a shortcut to temporarily switch this off on top of the settings page.
PART C ADD CONTACTS
You can add up to 8 contacts on your watch. Add contacts from the REFLEX ACTIVE RED app. To add contacts go to
"Favourite Contacts" and add contacts. The selected contacts will then be synced to your watch.
On the REFLEX
ACTIVE RED app
tap on "Favourite
Contacts" to add
your contacts.
PART D SWITCH BETWEEN PHONE AND WATCH
Switch between watch / phone during an active call: If your watch is
connected to your phone via Bluetooth, all calls will show up on the watch
by default. If during an active call you would like to switch to your phone,
SERIES 15_AUDIO
simply tap on the handset earpiece icon to select it. The call will then
switch to your phone.
PART E BATTERY ADVISORY
The battery lasts for 2 to 3 days with Bluetooth calling mode enabled. On standby the battery can last for
approximatley 5-7 days.
Select the
contacts you
would like to add
and save.