REFLEX ACTIVE 22 Series Getting Started

POWER ON / OFF
• To switch on the watch, press and hold the side button until the display is on.
• Switch off by long pressing the side button, or through the settings/more functions.
HOW TO CHARGE
1. Line up the 2 pins to the charging spots on the back of the watch case.
2. The pins are magnetic and will secure the charger in place.
3. Plug in the USB cable to a power source. Once connected, the charging icon will appear on screen.
4. Please charge the watch when it displays low battery.
5. A 2 hour charge time is sufficient to fully charge your smartwatch. Please take care not to over charge.
FUNCTIONS NAVIGATION
You can navigate the watch by sliding left / right and up / down.
BUTTONS OPERATIONS
Short pressing the side button:
• Unlocks the screen
• Returns to the main dial page
Long pressing the side button:
• Turns on / off the watch
• You can also switch off the watch through the settings
Series 22 - getting started
Please take a few minutes to read through these instructions,
they will help ensure you get the best from your smartwatch. You
can also visit our website or scan this QR code for lots of helpful
information and video guides. And of course, if you have any
questions, please get in touch, we're here to help!
www.reflex-active.com/pages/support
DOWNLOADING THE REFLEX ACTIVE RED App.
To download our app, search for REFLEX ACTIVE RED App . or scan the QR code with your smart phone
camera.
COMPATIBILITY
The REFLEX ACTIVE RED app will work on the following smartphones:
•
Android (version 9.0 and above)
•
Apple IOS (version 12.0 and above)
Please ensure the app is the latest version and has Bluetooth 5.0
CONNECTING YOUR SMART WATCH TO MOBILE PHONE
1. Enable BT on your smart phone.
2. Open the REFLEX ACTIVE RED App. on your smart phone.
3. Reveiw and accept privacy policy.
4. Set your profile following the steps presented.
5. To connect your watch, open device section at the bottom of the app & select 'add device' & select Series 22.
6. Tap OK to allow notifications to appear on your smartwatch.
- Allow permissions when prompted to gain full functionality of your watch.
DISCONNECTING YOUR SMART WATCH & PHONE
1. Open the REFLEX ACTIVE RED App. on your smart phone.
2. Tap remove device at the top of the device section of app.
3. You must also forget your device on your smart phones Bluetooth settings.
WATCH FACE
SELECTING YOUR DIAL DISPLAY
Your smartwatch has a number of our signature dials, to switch between them press & hold the screen and swipe
left or right to view. Once you have selected your dial, tap to set. Alternatively, you can access your dials by
entering DIAL SWITCH menu.
CHOOSING ADDITIONAL DIALS
There are more dials you can set from your app dial directory.
• Tap the watch face settings in the 'Device' > 'Series 22' page
• Select clockface
• Tap the dial you want to wear
The dial will automatically transfer to your watch screen, this may take a minute, a loading screen will be
displayed during transfer.
Note: Your watch will store one additional dial at a time, as a new dial is downloaded, it will take the place of the
previous download.
USING YOUR OWN PHOTO
You can select a photo from your smartphone gallery to use as your dial.
• Tap the watch face settings in the 'Device' > 'Series 22' page
• Tap edit on the first watch face
• Scroll & either choose an image from album or take an image
• Select the photo you'd like to use
• Move & scale within guide, click ok
• Move time around display as desired and tap set as watch face.
Note: You will need to allow access to your photo gallery to use this feature. Do this
within your phone settings.