Danalogic Extend Manual page 9

If you need to re-pair your
Android device
If one or both of your hearing aids have been
replaced, you will need to re-pair them to your
smart device.
1. Swipe down from the top of the screen to
open the 'Settings' menu, then hold the
Bluetooth icon for 2 seconds.
2. Hold the Settings icon for Hearing Aids for
2 seconds.
3. Select 'Forget'.
4. Open the BeMore app.
5. Open the 'BeMore Menu' and select
'Pair new hearing aids'. Then follow the
instructions on screen to connect. You are
now ready to go.
13112 How to connect to your smart device for bluetooth streaming with Extend.indd 9 13112 How to connect to your smart device for bluetooth streaming with Extend.indd 9 16/08/2024 16:11 16/08/2024 16:11