Danalogic Extend Quick Start Manual

Cleaning and replacing
slim tubes for danalogic Extend
Cleaning
Firstly, you can wipe down the slim tube and dome with a damp cloth. If the
slim tube is clogged with wax or other debris, remove it from the hearing
aid by carefully pulling the entire tube off of the hearing aid.
The right choice for the NHS
13112_How to clean and replace your Extend hearing aid slim tubes.indd 1 13112_How to clean and replace your Extend hearing aid slim tubes.indd 1
1. N ext, remove the dome by pulling it off the
ribbed end.
2. Now, push the cleaning wire through the
top of the slim tube where it connects to
the hearing aid. Thread the cleaning wire
completely through to fully remove
any debris.
3. Now, push the dome back onto the slim tube.
16/08/2024 17:11 16/08/2024 17:11