Advertisement
Technical Support and E-Warranty Certificate www.vevor.com/support
PRE-FILTER
BSK-T4-F3-N
BSK-T4-F3-G
BSK-T4-Q2-N
BSK-T4-Q2-G
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Related Manuals for VEVOR BSK-T4-F3-N
Summary of Contents for VEVOR BSK-T4-F3-N
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support PRE-FILTER BSK-T4-F3-N BSK-T4-F3-G BSK-T4-Q2-N BSK-T4-Q2-G We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-
Page 3: Product Introduction
Warning-To reduce the risk of injury, user must read instructions manual carefully. Product Introduction The Whole House Pre-filter is mainly used to intercept contaminants such as granules, impurities, sediment, rust, floating objects and so on. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, washing machine, shower and other terminal water equipment. -
Page 4: Correct Disposal
5. Depending on the water quality of different locations, please wash the filter normally at least once a month . 6. In the normal cleaning and maintenance process, please pay attention to the protection of the components . 7. BSK-T4-Q2 models suggest replacing the pressure control valve core within 5 years. - Page 5 WARNING: Changes or modifications to this product not expressly approved by the party. Responsible for compliance could void the user's authority to operate the product. Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 6: Technical Parameters
TECHNICAL PARAMETERS Product Pre-filter Name Product BSK-T4-F3- BSK-T4-F3- BSK-T4-Q2- BSK-T4-Q2- Model 1′′ NPT or 1′′ NPT or Connector 1′′ or 3/4′′ 1′′ or 3/4′′ 3/4′′ NPT 3/4′′ NPT Product 172*219*39 172*219*39 151*195*34 151*195*34 Sizes Clean Water 8T/H 4T/H Flow Filtration 40μm Precision Applicable... -
Page 7: Name Of Each Component
NAME OF EACH COMPONENT BSK-T4-F3-N/BSK-T4-F3-G BSK-T4-Q2-N/BSK-T4-Q2-G - 6 -... - Page 8 (Note: the decomposition of product structure is for reference only. If it is inconsistent with the actual product, it’s subject to the actual product.) TECHNICAL PARAMETERS ① Product Installation Diagram Taking BSK-T4-Q2 as an Example. 1.Note the arrow direction of the water flow 2.Close the main inlet valve and drain the remaining water from the pipe.
- Page 9 ② 1.The wrapping of Teflon tape should be installed by professionals. Before the installation, please check if the components are complete. 2.PPR pipe installation needs special welding equipment, and the welding should be strong. 3.If the metal hard pipe is installed, it is necessary to add the pipeline according to the actual situation.
- Page 10 USER MANUAL 1.After installation, open the main inlet valve and flush it. 2.Before the flushing, make sure there is a reliable drainage system, or to use a suitable container to hold the waste water after flushing. By turning the ball valve handle in the lower part of the filter counterclockwise by 90 , then turning the black scraping knob at the lower part of the filter clockwise or counterclockwise for 3 or 4 rounds, then the internal parts of the filter bottle can be cleaned and drained Depending on the water...
- Page 11 Dismantle and Wash the Filtering Components Professional operating is recommended. When normal scraping or flushing can not remove the dirt on the filter mesh, and normal water use is affected, it is recommended to take out the filter mesh and wash Open the filter bottle counterclockwise with the wrench offered in the pack.
- Page 12 Install the Scraper and Mesh When the scraping components are installed into the filter bottle, please make sure the quadrilateral holes with round corner in the scraping components are fitted with the quadrilateral column on the water discharge copper parts at the bottom of the filter bottle, and the holes are inserted to the end of the...
- Page 13 Installation Of Scraping Components And Filter Mesh Components It should be installed by professionals. Before the installation, please check if the components are complete. After installation, you must manually switch the controller several times to see if there is any abnormal phenomenon. The reverse operation process can remove the automatic controller Description of Pressure Control Function (Pressure control...
- Page 14 Operation Instructions of The Ball Valve Automatic Controller Panel Display / Key Description Set The Opening Time State For The Ball Valve The left illustration shows the opening time state of the ball valve, and press”Set”Switch the state to "S" , and set the opening time for the ball valve 15 seconds / 30 seconds / 45 seconds / 60 seconds / 90 seconds, press "+”...
- Page 15 Show The Self-inspection Status The left illustration shows the self-inspection state of the ball valve after the product is recharged or restarted, and the drain icon flashes. Note: other functions cannot be used during self-inspection status. Set The Switch Interval State Of The Ball Valve The left illustration shows setting the switch interval state of the ball valve.
- Page 16 Display The Standby State In Auto Mode The left illustration shows that under its factory default state( the same as the state after restart), the "AUTO" state, the controller will open the ball valve for draining of 15 seconds after an interval of 15 days, and then automatically close the ball valve.
-
Page 17: Packing List
PRODUCT FAULT ANALYSIS Packing List 1 set of Pre-filter 1 set of User Manual - 16 -... - Page 18 1 set of Attachment Package (mounting wrench, sewer drain connector, sewage drain pipe, etc.) Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 YH CONSULTING LIMITED.
- Page 20 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the BSK-T4-F3-N and is the answer not in the manual?
Questions and answers