Solight DT35 Instruction Manual

EN DT35
Digital time switch
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and
instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but
also the long life of the equipment.
T EC H N IC A L P A R A M ET E R S
Power
Operating temperature
Coverage
FIR ST C O N S EC R A T IO N
When the device is started or after resetting the device, all the information on the display lights up for about 3 seconds.
The device then switches to the main screen. If the display is faulty, reset the device.
SET T IN G H O U R S A N D D A YS
S ettin g d ays
Press the CLOCK button, then the MO at the top of the display will flash. Press the WEEK button repeatedly to select the
current day of the week: M O (Monday), T U (Tuesday), W E (Wednesday), T H (Thursday), FR (Friday), S A (Saturday),
S U (Sunday). Press CLOCK to complete the setting.
C lo ck settin gs
Press the CLOCK button, then press HOUR and the clock will flash. Press the HOUR button repeatedly to select the
current hour. Press CLOCK to complete the setting.
S ettin g m in u tes
Press the CLOCK button, then press MIN and the minutes will flash. Press the MIN button repeatedly to select the
current minute. Press CLOCK to complete the setting. Seconds will start counting from 0-60 after each setting.
N O T E : Holding down the WEEK button on the main screen will add 1 extra hour (shown as +1H). This function can be
used, for example, when changing daylight saving time/winter time.
230V/16A (3680W)
-10 + 40°C
IP20 (indoor use)