Solight DT33 Instruction Manual

Before connecting the timers to electric devices, please read this manual carefully.

WARNING!

For indoor use only.
Do not connect multiple timers in series.
To disconnect the power supply, remove the plug from the socket.
Do not connect appliances with a consumption greater than 16 A. Always make sure that the plug of
the appliance is fully inserted into the timer socket. If it is necessary to clean the timer, unplug it and
wipe it with a dry cloth.
DO NOT SUBMERGE THE TIMER IN WATER OR OTHER LIQUIDS.
Never leave heaters and similar appliances running unattended. The manufacturer does not
recommend connecting these devices to timers.
1. R: Deleting all data in the memory including the current time and all programs.
2. PROG/+: Setting the current time in combination with the SET buttons, – ; Program settings in
combination with SET buttons, –; CD settings in combination with SET buttons, –; Press PROG/+ and
– buttons at the same time to enter CLOCK mode in program settings or CD setting mode.
3. SET: Setting the current time in combination with the PROG/+, – buttons; Program settings in
combination with PROG/+, – buttons; CD settings in combination with PROG/+, – buttons;
4. —: Setting the current time in combination with SET, PROG/+ buttons; Program settings in
combination with SET, PROG/+ buttons; CD settings in combination with SET, PROG/+ buttons;
5. RND: Setting or canceling the RANDOM function (Random switching).
6. CD (COUNTDOWN): Set or cancel the CD function.
7. MANUAL: Selecting the operating mode (ON, AUTO, OFF) of the timer; suppressing program
settings or restoring suppressed programs.
1. LED power control light
2. 10 ON/OFF programs in steps of 1 minute.
3. Optional options MANUAL ON/AUTO/MANUAL OFF.
4. Optional 12/24-hour mode.
5. LCD display with seconds indicator.
6. Possibility of using the second (summer) time.
7. Random switching function at an interval of 10-31 minutes between 6 PM and 6 AM-
8. The following 16 combinations of days or blocks of days are available:
MON TUE WED THU FRI SAT SUN
MON, TUE, WED, THU, FRI, SAT MON, WED, FRI
9. For the CD (COUNTDOWN) function a maximum of 99 hours 59 minutes 59 seconds can be used-
10. : Backlighting
1. Connect the timer to a standard 230V electrical socket and turn on the power. Take approx. 10 minutes to
charge the backup memory battery. The battery is built-in and it is not possible to change it.
2. After charging, delete all previous data by pressing the R button with a sharp object such as a pen or pencil.
3. The timer is now ready to be set for further use.
DT33 INSTRUCTIONS MANUAL

IMPORTANT

KEYBOARD DESCRIPTION

GENERAL FUNCTIONS

MON,TUE,WED,THU, FRI, SAT, SUN
TUE, THU, SAT

FIRST COMMISSIONING

MON, TUE, WED, THU, FRI SAT SUN
MON, TUE, WED THU, FRI,SAT MON,WED,FRI,SUN