Page 1
FUEL CADDY—— JGC32PE Model: JGC32PE We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. 2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. GENERAL SAFETY RULES When using this product, basic precautions should always be followed, including the following;...
Page 4
This product is not suitable for placing in a yacht, off-road vehicle, and another violent vibration place. Never use the fuel caddy near open flames or heal sources. SAVE THESE INSTRUCTIONS MODEL AND PARAMETERS Model JGC32PE Capacity 32 Gal Fuel Type Diesel,Lubricating Oil,Gasoline Oil Discharge Electric Pump...
STRUCTURE DIAGRAM 1. Handle 2. Fuel Tank 3. Fixed Wheel 4.Outlet 5. Electric Pump 6. Fixed Plate Assembly 7. Long Hose 8. Fuel Tank Cap 9.Flexible Pipe 10.Universal wheel - 4 -...
Page 6
COMPONENTS Picture Name and Qty Picture Name and Qty Fixed Plate Box (x1) Assembly (x1) M4*16Cross Slot Electric Pump (x1) Head Screw (x4) Φ4 Flat Washer Fuel Tank Cap (x1) (x4) Long Hose (x1) M4 Jam Nut (x4) Φ13-Φ19Hose Inner Silk Pagoda Joint (x1) Clamp (x1)...
Page 7
ASSEMBLY Step1: Install the pump(2) on the fixed mount(9) and pre-tighten with screws,gasket and nuts(10,11,12) as shown below. Step2:Install the assembly on the fuel tank and lock with screws(6) as shown. Put on the fuel tank cap(3). - 6 -...
Page 8
Step3:Install the pagoda connectors(13,14) on the electric pump as shown. Step4:Connect the long hose(4) to the outlet connector of the pump and lock with hose clamp(5). Connect pump inlet to tank outlet with flexible pipe(8) and lock with hose clamp(5). - 7 -...
Step5: Make sure that the components are tightened;The product is assembled and ready for use. OPERATION Refueling operation: -Please choose the appropriate oil filling, do not fill with chemicals or other corrosive solvents. - 8 -...
-Lay the tank flat and make sure the direct ball valve joint is closed. -Open the tank cap and fill the oil. -Pay attention to the tank filling during oil filling to avoid overflow. -After filling the tank, tighten the cap and place the tank in a safe place. Pumping operation: -Before pumping oil, ground the grounding wire of the fuel tank.
Need help?
Do you have a question about the JGC32PE and is the answer not in the manual?
Questions and answers