Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for pagertec ALPHA TXT
Summary of Contents for pagertec ALPHA TXT
- Page 1 ALPHA TXT PAGING SYSTEM Version: Pre-set Message...
- Page 2 Thank you for choosing Pagertec Thank you for choosing Pagertec as your provider for your wireless paging requirements. is providing you with total customer satisfaction. Please take a few minutes to review this manual prior to installing and operating your system. The manual will provide you with installation instructions, and offer suggestions to ensure you receive all of the many Pagertec has the most responsive customer service available within the industry.
-
Page 3: Paging System
Track Staff PAGING SYSTEM... - Page 4 Installing the Transmitter readily accessible in a central location within the paging area. Pay close attention to nearby obstructions such as walls, pipes, ducts, mirrored glass, or other similar barriers that may weaken or misdirect transmitted signals. Certain materials and construction, especially metal, have the potential to partially or completely block the paging signal.
-
Page 5: General Information
Installing the Alpha Text Paging System GENERAL INFORMATION Alpha Text Pagers are used in conjunction with the Pagertec transmitters. The pagers are customers or staff members. CHARGING BASE INSTALLATION 1. Install the charging base. Note: Keep rechargeable pagers on charge even during extremely long periods of inactivity. -
Page 6: Battery Installation
This will release the metal clip from the pager. Then, slide the metal clip out from the pager. Replace clip with an appropriate replacement part available for purchase as an accessory from Pagertec. -
Page 7: System Programming
Pagertec pagers are made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning Pagertec pagers, you should only use ETHYL ALCOHOL (ethanol) or ISOPROPYL ALCOHOL-BASED CLEANERS. We have done extensive testing with available cleaning materials and have not found any issues with either ethyl alcohol (ethanol) or isopropyl alcohol (IPA). - Page 8 SET ALERT MODE Note: Put all the pagers on the charger and disconnect the power supply going to the charger. Connect the charger back to the wall outlet. You will have three (3) minutes to program the Set Alert Mode. With this feature you can have the option of changing your pagers alert type.
- Page 9 SET ALERT TIME With this feature, you can set the alert time how long the pager alerts when the pager re- ceive the signal from the transmitter. To change the Alert time mode of your pagers, follow these instructions: At the “Set Alert Time”...
- Page 10 SET PAGER OFF With this feature you can have the option of turning off the pager to save battery. Remove all the pagers from the chargers At the “set pager off” press “ENTER”. Pager off ? will appear on display Press Send, all pagers that have received the signal will blink for 2 seconds Note: Put all the pagers on the charger and disconnect the power supply going to the charger.
- Page 11 At the range test menu, press “#/Select” key to turn range test “ON” and to start the 30 seconds. Walk around your property. When you reach the point where the coasters power level, exit range test and call Pagertec. •...
-
Page 12: Fcc Compliance And Advisory Statement
FCC COMPLIANCE AND ADVISORY STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ALPHA TXT and is the answer not in the manual?
Questions and answers