Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for AKSO AK47
Summary of Contents for AKSO AK47
- Page 1 INSTRUCTION MANUAL...
-
Page 2: Specifications
1. SPECIFICATIONS - Measuring range: 0.00 to 2.00 ppm - Resolution: 0.01 ppm - Accuracy: ± (0.10 ppm + 5% of reading) - Adjust: 4 points (0, 0.5, 1, 2 ppm) - Sample temperature: 15 to 35 °C - Sample volume: 10mL - Light source: Light emitting diode - Wavelength: 520nm - Measuring cell: Glass cuvette... - Page 3 Items sold separately: - Reagent for fluoride (25 tests) AK4047 - Verification standard solution kit (0, 1 ppm) AK4225 Before use, check the instrument carefully. If you detect any abnormalities, contact AKSO. 3. OVERVIEW Measuring cap Automatic shutdown Battery level...
- Page 4 2) Wash the cuvette 3 to 4 times using ultrapure water to avoid reading deviations; 3) Fill the cuvette with 2mL of the Akso reagent for fluoride and complete to the indicated line on the body of the cuvette with ultrapure water;...
- Page 5 12) Remove the lid from the cuvette and completely discard the liquid, ensuring that it is free of any reagent residue; 13) Add 2mL of Akso reagent for fluoride and fill to the indicated line on the body of the cuvette with your sample;...
-
Page 6: Access And Navigation
5. SETTINGS ACCESS AND NAVIGATION To access the settings menu on the instrument: briefly press the Power-Measurement button and the screen will show CONFIGS and options; To navigate the parameters that can be configured, briefly press the button; ... -
Page 7: Maintenance
6. MAINTENANCE BATTERY INSTALATION/REPLACEMENT When the display displays Low Battery, replace the battery as described below: 1) Turn off the instrument by holding down the Power- Measurement button until the display is switched off; 2) Remove the base clamping screw at the bottom of the instrument, using a “Philips”... -
Page 8: Error Messages
Error in the measurement following the measurement Inverted samples procedure. procedure. Failure to communicate with Contact Akso Technical Damaged sensor the sensor. Support. Go to the product page on the Akso website and make sure your manual version is up to date.
Need help?
Do you have a question about the AK47 and is the answer not in the manual?
Questions and answers