Advertisement
Quick Links
Square Box
Recommended Tools:
Rubber Mallet
Step 1:
Begin by connecting the side pieces together. Slide
the hooks on one panel through the slots on the other
panel, then press down to secure them.
Step 2:
After all sides are attached, position the top piece
in place and secure it by hammering it down with a
rubber mallet if necessary.
Instruction Manual
Pop Up Parkour
Need help?
Call 1-800-932-3339 or
Email info@gymsupply.com
1
Advertisement
Related Manuals for DGS Pop Up Parkour
Summary of Contents for DGS Pop Up Parkour
- Page 1 Instruction Manual Pop Up Parkour Square Box Recommended Tools: Rubber Mallet Step 1: Begin by connecting the side pieces together. Slide the hooks on one panel through the slots on the other panel, then press down to secure them.
- Page 2 Instruction Manual Pop Up Parkour Small Rectangular Box Recommended Tools: Rubber Mallet Step 1: Begin by connecting the side pieces together. Slide the hooks on one panel through the slots on the other panel, then press down to secure them.
- Page 3 Instruction Manual Pop Up Parkour 2-Sided Trapezoid Box Recommended Tools: Rubber Mallet Step 1: Begin by joining the side pieces together, aligning the slots over the notches. Secure them in place by hammering with a rubber mallet, ensuring the angled edges are positioned at the top to sit flush with the top piece.
- Page 4 Instruction Manual Pop Up Parkour 1-Sided Trapezoid Box Recommended Tools: Rubber Mallet Step 1: Begin by connecting the side and rear pieces together. Slide the hooks on one panel through the slots on the other panel and press down to secure them.
- Page 5 6ft Beam With Connectors Step 1: To install the beam, remove the top of your Pop Up Parkour Box. Align the beam so that the threads pass through the box’s holes. Step 2: Inside the box, place the washer over the threads and secure it with a wingnut.
- Page 6 6ft Pipe With Connectors Step 1: To install the pipe, remove the top of your Pop Up Parkour Box. Align the pipe so that the threads pass through the box’s holes. Step 2: Inside the box, place the washer over the threads and secure it with a wingnut.
Need help?
Do you have a question about the Pop Up Parkour and is the answer not in the manual?
Questions and answers