Related Manuals for LANSEN LAN-WMBUS-R4-M-LR-A2
Summary of Contents for LANSEN LAN-WMBUS-R4-M-LR-A2
- Page 1 QUICK INSTALLATION GUIDE INDOOR/OUTDOOR LONG RANGE MAINS REPEATER [LAN-WMBUS-R4-M-LR-A2] Version: 01...
- Page 2 Appropriate disconnection device, such as a power supply cable with socket, shall be repeater on pole recommended to use the Lansen pole mounting kit (article used as part of the building instruction. It should be close to the device and easily number LAN-910-0066).
- Page 3 Strip the power supply cable according to the diagram below. Step 8 (Installation on pole/pipe/mast) Install the Lansen pole mounting kit (article number LAN-910-0066) on the back of the repeater. Pull the straps through the holes and wrap it around the pole or pipe which the repeater is going to be mounted on and tighten the straps, so it is securely mounted.
- Page 4 Step 9 Thread the power supply cable (prepared in Error! Reference source not found.) through the cable inlet, either from the back of the repeater or on the side (marked by red circles). Connect the power supply cable to the coupling clamps on the inside (marked by blue circle).
Need help?
Do you have a question about the LAN-WMBUS-R4-M-LR-A2 and is the answer not in the manual?
Questions and answers