Advertisement
Quick Links
Advertisement
Related Manuals for LANSEN LAN-WMBUS-R4-M-LR-A1
Summary of Contents for LANSEN LAN-WMBUS-R4-M-LR-A1
- Page 1 QUICK INSTALLATION GUIDE INDOOR LONG RANGE MAINS REPEATER [LAN-WMBUS-R4-M-LR-A1] Version: 01...
- Page 2 Appropriate disconnection device, such as a power supply cable with socket, shall be used outdoors, then the repeater needs to be fitted with a Lansen sealing kit used as part of the building instruction. It should be close to the device and easily (article number LAN-910-0042).
- Page 3 Step 4 Step 7 Note: This solution gives IP-class IP40. Do NOT use this for outdoor installations! Thread the power supply cable (prepared in Step 5) through the cable inlet, either To use the hole at the back for the power supply cable, carefully cut, drill, or punch from the back of the repeater or on the side (marked by red circles).
- Page 4 Step 9 Attach the cover and mount the screw (marked with a red circle on the image below). Make sure the clips at both sides of the cover are firmly attached. Note: The screw is a Security Torx T20H (with a small pin in the middle). Installation is now complete!
Need help?
Do you have a question about the LAN-WMBUS-R4-M-LR-A1 and is the answer not in the manual?
Questions and answers