Table of Contents
Advertisement
of your system.
16. MICROPHONE – Used to record your outgoing message (OGM) and
memos using this built-in microphone.
17. LED Indicator- Illuminates when unit is on and flashes when new ICM
messages are received, new Two-way or new Memo recorded.
?? INSTALLING THE UNIT
Installing the Battery
1.
IF connected, unplug the unit from the telephone line and power adaptor.
2.
Open the battery compartment cover (located underneath the unit). Insert a
9V (1604) alkaline or carbon-zinc battery, (not supplied) observing the
polarity as indicated on the base of the compartment.
3.
Replace the cover securely.
Important>>During power failure the 9V (1604) alkaline or carbon-zinc
battery maintains your Out Going Message (OGM), and any recorded
messages, and your Security Code. The unit will not operate until mains
power is restored.
Note>> If you do not install a 9V (1604) alkaline or carbon-zinc battery, any
disruption to the mains power supply will result in a loss of your OGM
announcement, any recorded messages, and your Security Code. The
OGM announcement and Security Code will revert to the factory default
5
Hide quick links:
Advertisement
Table of Contents
