Richter 7.79000 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This equipment should be installed on an
impact absorbing surfacing / loose fill material
that accords with DIN EN 1176 / EN 1176 and
is adequate for a maximum free height of fall
of ≤ 3.00 m.
B Foundations
Please take into account the special sheet:
Notes on the construction of foundations.
Special information
Certified by TÜV Süd Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
Required space including safety distances (EN 1176)
600 x 600 cm
Ground plan
scale 1:100
all dimensions in cm
Foundations
quality of concrete C25/30
7 items 40 x 40 x 50 cm
excavation depth 70 cm
1 item 60 x 40 x 50 cm
excavation depth 70 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY
climbing rope
point of reference
INSTRUCTIONS ·
Octagonal Tower
with steel feet and climbing rope
Order No. 7.79000
with connection for tunnel slide
Order No. 7.79030
with connection for open slide
Order No. 7.79050
Components
Number of parts: 6
1 tower
1 basket top
1 roof with climbing rope
1 bundle: 8 steel feet
1 bundle: 4 stand posts for roof
1 bag of screws/bolts
Total weight:
heaviest single part:
largest single part:
ASSEMBLY INSTRUCTIONS
approx. 1300 kg
approx. 900 kg
Ø 1.90 m x 2.35 m
safety distances
foundations
slide if applicable
entrance
Page 1