Chapter 2: Connecting An Antenna Or Cable To Your Tv; Connecting An Antenna - Audiovox AVT-1928 Instruction Manual

19” color television
Table of Contents

Advertisement

Connecting an Antenna or cable to Your TV
Your TV will provide you with the best performance if you connect it to an external antenna or
cable system. Follow the directions below to make this connection. Please note that you will
normally only have to make one of the connections shown below, not all of them.
All connections will be made to the antenna terminal on the back of your TV. The antenna
terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating the
antenna terminal, see "Your TV's Back Panel" on page 4.
If you purchased model AVT-1928 there is no antenna provided with your TV.

Connecting an Antenna

If your antenna ends in a pair of 300 ohm twin leads, you must use a 300-ohm/75-ohm adapter.
Place the leads underneath the screws on the adapter, tighten the screws, then press the adapter
onto the antenna terminal on the back of the TV. (the adapter is not included with your TV).
2
If your antenna ends in a single coaxial lead,
simply press or screw the cable into the back of
your TV.

Advertisement

Table of Contents
loading

Table of Contents