Richter 10.55000 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This piece of equipment is intended for
children to play with, rather than on, and
therefore has no intended body support. No
free height of fall is thereby stipulated.
B Foundations
Please take into account the special sheet:
Notes on the construction of foundations.
C Note
Pipelines, collection well and slip-on
sleeves are not included in delivery!
For optimal sound transmission we
recommend using flexible cable duct DN 110
(Kabuflex) off the roll. Also suitable is waste
water pipe (e.g. KG, HT) DN 110. However,
they should be laid using angles which are
as flat as possible, e.g. 3 x 30 ° instead of
1 x 90 °. The two pipe systems can also be
combined with the appropriate pipe fittings.
D Planning details
Exact details on the position of the equipment
elements should be obtained from planners
or respectively architects before beginning
assembly.
Required space including operational space
2.00 x 3.00 m per column, observe space requirements for collection
well and pipelines.
Ground elevation
scale 1:50
all dimensions in cm
Foundations
quality of concrete C25/30
1 item 60 x 60 x 70 cm
excavation depth 90 cm
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS · ASSEMBLY
Conference
Order No. 10.55000
Components
Number of parts: 3
1 conference
1 pipe coupling incl. clean-out opening
Weight: approx. 21 kg per column
Size: approx. 40 x 65 x 170 cm
Special information
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
INSTRUCTIONS
foundations
operational space
Page 1