Connection To An Audio System - Magnavox MSR90D6 Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
Note
• Playing a DVD using incorrect settings may
generate noise distortion and may also damage
the speakers.
Connections

Connection to an Audio System

Analog audio
input jacks
VIDEO OUT
L
R
AUDIO OUT
AUDIO OUT
If output is Dolby Digital
encoded audio, connect to
a Dolby Digital decoder.
Unless connected to a
Dolby Digital decoder.
Connecting to an MD deck
or DAT deck.
* To complete these settings, refer to pages 66-67.
Note
• The audio source on a disc in a Dolby Digital Multi-channel
• By hooking this unit up to a Multi-channel Dolby Digital
• Playing a DVD using incorrect settings may generate noise
Method 2
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
DIGITAL
AUDIO OUT
COAXIAL
Setting
Connection
surround format cannot be recorded as digital sound by an
MD or DAT deck.
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
distortion and may also damage the speakers.
Digital audio
input jack
Setup >Playback >Disc Audio >Digital Out >
PCM Dolby Digital
- STREAM
PCM
-
PCM
-
EN
15