Connection To An Audio System - Magnavox MWR10D6 Quick Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
AUDIO
This unit
Note
• Playing a DVD using incorrect settings may
generate noise distortion and may also damage
the speakers.
Downloaded from www.Manualslib.com

Connection to an Audio System

Method 1
Stereo system
Analog audio
input jacks
Audio cable
(supplied)
VIDEO OUT
L
R
AUDIO OUT
AUDIO OUT
manuals search engine
Connections
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Connection
If output is Dolby Digital
encoded audio, connect to
a Dolby Digital decoder.
Unless connected to a
Dolby Digital decoder.
Connecting to an MD deck
or DAT deck.
* To complete these settings, refer to pages 66-67.
Note
• The audio source on a disc in a Dolby Digital Multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Method 2
Digital audio
COAXIAL
input jack
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
COAXIAL
Setup >Playback >Disc Audio >Digital Out >
Setting
PCM Dolby Digital
- STREAM
PCM
-
PCM
-
EN 15