Magnavox MWR10D6 Quick Manual

Hide thumbs Also See for MWR10D6:

Owner's manual (82 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for Magnavox MWR10D6

Page 1 VIDEO AUDIO IN AUDIO IN (Cable box or (Cable box or Satellite box) Satellite box) DVD Recorder Connect Connect Connect Connect MWR10D6 Video Video Connect Connect Audio Audio cable cable cable cable RF cable (not supplied) RF cable (not supplied)
Page 2: Dvd Recording
DVD Recording Timer Recording – 2 • You can set up to 8 programs (once, daily or weekly). Easy Recording • Be sure to set the clock before starting a timer programming. – 1 Press [TIMER PROG.]. Timer Programming list appears. Select the recording How to select the recording mode: Select any blank line with [K/L] and press [OK].
Page 3: Connection To A Tv
Recordable disc • We strongly recommend for good recording quality: TDK DVD+R 4x/8x/16x, SONY DVD+R 4x/8x/16x, MAXELL DVD+R 4x/8x/16x, SONY DVD+RW 4x, MAXELL DVD-R 8x/16x, MAXELL DVD-RW 4x • Discs that have been tested and are proven to be compatible with this recorder: VERBATIM DVD+R 8x, VERBATIM DVD+RW 4x, VERBATIM DVD-R 8x, VERBATIM DVD-RW 2x, MAXELL DVD-R 16x, JVC DVD-RW 4 DVD Recorder MWR10D6 INSTRUCCIONES EN ESPAÑOL INCLUIDAS Please read before using this equipment. If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call TOLL FREE : 1 800-605-8453 or visit our web site at http://www.funai-corp.com Connection to a TV (Before you use this unit, you need to complete connections.) If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on pages 13–15. If not, it is still possible to connect this unit to...
Page 4: Before You Start
Before you start Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, CAUTION within an equilateral triangle, is intended to alert the user to the presence of uninsulated RISK OF ELECTRIC SHOCK “dangerous voltage” within the product’s DO NOT OPEN enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to CAUTION :...
Page 5: Important Safeguards
Before you start Precautions (cont’d) IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating NFPA No. 70, provides information with regard to proper instructions should be read before the appliance is grounding of the mast and supporting structure, grounding operated. of the lead-in wire to an antenna discharge unit, size of 2. Retain Instructions- The safety and operating instructions grounding conductors, location of antenna-discharge unit, should be retained for future reference. connection to grounding electrodes, and requirements for 3. Heed Warnings - All warnings on the appliance and in the the grounding electrode. (Fig. A) operating instructions should be adhered to. FIGURE A 4. Follow Instructions - All operating and use instructions ANTENNA EXAMPLE OF ANTENNA GROUNDING should be followed. LEAD AS PER NATIONAL ELECTRICAL CODE WIRE 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. GROUND Use a damp cloth for cleaning. CLAMP ANTENNA EXCEPTION: A product that is meant for uninterrupted...
Page 6 Before you start Precautions (cont’d) Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise...
Page 7 Before you start Precautions (cont’d) Maintenance SERVICING • Please refer to relevant topics on “Troubleshooting” on pages 71-74 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user- serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. CLEANING THE DISC LENS • If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. IR SIGNAL CHECK If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to...
Page 8: Table Of Contents
Before you start Table of contents Playing discs using the title menu ... 41 Before you start ....2 Pause .
Page 9: Features
Before you start Features This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Setting pictures for thumbnails: Recording You can change pictures for thumbnails. This unit is compatible with DVD+RW/DVD-RW, Dividing titles (DVD+RW/DVD-RW only): which is rewritable repeatedly and DVD+R/DVD- R, which is available for recording once. You can You can divide a title into two or more. choose either one for your convenience. Even if you Putting name on disc: choose DVD-RW/DVD-R discs, these discs are for- You can put your favorite disc name. matted with DVD+VR mode. Up to 8 program recording: Compatibility You can program the unit to record up to 8 pro- Available for playing discs on a regular DVD grams, with in a month in advance. Daily or weekly player: program recordings are also available.
Page 10: Functional Overview
Before you start Functional overview Front Panel 2* 3 4 * The unit can also be turned on by pressing this button. 1110 9 Disc tray 7. NEXT G button Place a disc when opening the disc tray. During playback, press to skip to the next chap- OPEN/CLOSE A button* ter or track. Press to open or close the disc tray. During playback, press and hold for 1.5 seconds to PLAY B button fast forward. Press to start or resume play. Or when playback is paused, press to play for- RECORD I button ward step by step.
Page 11 Before you start Functional overview (cont’d) Rear Panel COMPONENT VIDEO IN VIDEO OUTPUT VIDEO OUT S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM ANTENNA COAXIAL AUDIO IN AUDIO OUT (E1) 1. ANTENNA IN jack 7. COMPONENT VIDEO OUTPUT jacks Use to connect an antenna. Use to connect a TV monitor with component 2.
Page 12 Before you start Functional overview (cont’d) 13. REC I button Remote Control Press once to start a record- ing. Press repeatedly to start a One-Touch Timer Recording. 14. RAPID PLAY button During playback, press to playback in a slightly faster/ slower mode with keeping the audio quality. 15. DISPLAY button Press to display the Display menu on or off. 16. OPEN/CLOSE A button* Press to open or close the disc tray. 17. CM SKIP button During playback, press to skip 30 seconds.
Page 13: Installing Batteries In The Remote Control
Before you start Functional overview (cont’d) Installing batteries in the remote control Using a remote control Keep in mind the following when using the remote Install two “AAA” size batteries (supplied) matching control: the polarity indicated inside battery compartment of • Make sure that there is no obstacle between the the remote control. remote control and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. Note: • The maximum operable ranges from the unit are Incorrect use of batteries can result in hazards as follows. such as leakage and bursting. Please observe the - Line of sight: approx. 23 feet (7m) following:...
Page 14: Setup Menus
Before you start Functional overview (cont’d) Setup menus Press [SETUP] to display the Setup menu. Then using press [OK] to display [K / L], select a menu and the menu. These menus provide entries to all main functions of the unit. 1. Edit Disc Name: <Disc Edit menu (DVD+RW)> Setup Allows you to rename the Required Settings disc formatted with DVD+VR. Disc Edit Playback Display 2. Disc Protect : Edit Disc Name Recording Disc Protect OFF Allows you to protect a disc Clock Erase Disc from accidental editing or...
Page 15: Connections
After you have completed connections • Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details. Input Mode Names for Common TV Brands LXI-Series Admiral Sharp Magnavox Curtis Mathis LINE1, LINE2, 00, 90, 91, 92, 93 AUX CHANNEL Sony VIDEO1, VIDEO2, VIDEO3 INPUT, TV/VCR, 00, 90, 91, 92, 93 Panasonic...
Page 16: Connection To A Cable Box Or Satellite Box
Connections Connection to a cable box or satellite box (Back of TV) VIDEO AUDIO IN Connect Connect Video Connect Audio (Cable box or cable Cable cable Satellite box) RF cable (supplied) TV signal (supplied) (supplied) COMPONENT VIDEO IN VIDEO OUTPUT VIDEO OUT S-VIDEO DIGITAL AUDIO OUTPUT...
Page 17: Connection To An Audio System
Connections Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Method 2 Stereo system Dolby Digital decoder, MD deck or DAT deck Analog audio input jacks AUDIO Digital audio COAXIAL input jack Audio Coaxial Audio cable Digital cable (supplied) (commercially available) VIDEO OUT This unit DIGITAL AUDIO OUTPUT...
Page 18: Getting Started
Getting started Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit with the TV correctly. Step 1: Choose a disc type. Step 2: Turn on the unit There are several types of recordable DVD discs to choose from. This unit can record on the following type of discs. Remote Control Select the input to which For example, when you want to record repeatedly on the the unit is connected on same disc, select the rewritable DVD+RW/DVD-RW type disc.
Page 19 Getting started Easy DVD recording (cont’d) Step 5: Select the Step 6: Record Step 7: Stop the desired on DVD recording. channel. disc. Writing to Disc SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 ENPTY TITLE CH 12 1:41:17 SP (2Hr) This operation may take a while to be completed.
Page 20: Initial Setting
Getting started Initial setting Turn on this unit for the first time, you need to follow these steps. Using [K / L], select your desired language on screen menu. Then press to set Press [STANDBY-ON language. “Channel Preset” will automatically appear. Turn the TV on. Select the input to which the unit is connected. Initial Setup Refer to the table on page 13.
Page 21: Adding/Deleting Channels
Getting started Channel setting (cont’d) To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press [1], [1], [7]) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). • You can select the line input mode (“E1” or “E2”). To select “E1” by pressing [0], [0], [1]. To select “E2” by pressing [0], [0], [2]. Details are on page 35. Note • If the auto channel presetting is cancelled during presetting, some channels not yet preset may not be received. • The selection will depend on how you receive the TV channels. To cancel the auto channel presetting during scanning: Press [RETURN] or [SETUP] to cancel.
Page 22: Selecting The Tv Stereo Or Sap
Getting started Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Using [K / L], select “TV Audio Select”. Press [OK]. Option window will appear. Press [SETUP]. TV Audio Select Stereo Using [K / L], select “Required Settings”. Press [OK]. Required Settings menu will appear. Using [K / L], select “Stereo” or “SAP”.
Page 23: Setting The Clock
Getting started Setting the clock Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is • If you do not know your PBS available in your area, follow “Auto channel number: Clock Setting” below. If not, follow Using [K / L], select “Auto”. “Manual Clock Setting” on page 22. Press [OK]. The setting will be activated. Auto Clock Setting • If you know your PBS channel Make sure number: • The antenna/Cable TV...
Page 24: Manual Clock Setting
Getting started Setting the clock (cont’d) Manual Clock Setting Using [K / L], enter the date (month / day / year). Press [{ / B] to move the cursor. Press [SETUP]. Clock Setting Using [K / L], select “Clock”. Press [OK]. JAN / 01 / 2006 ( SUN ) 12: 00 AM Using [K / L], select “Clock Setting”.
Page 25: Setting The Daylight Saving Time
Getting started Setting the clock (cont’d) Setting the Daylight Saving Time Using [K / L], select “Daylight When “Daylight Saving Time” is Saving Time”. Press [OK]. ON, the unit clock will automati- Option window will appear. cally move forward one hour on the first Sunday in April and move Daylight Saving Time back one hour on the last Sunday in October. “On” has been selected as the default. Press [SETUP]. Using [K / L], select “ON” or “OFF”.
Page 26: Recording
Recording Information on DVD recording Information Recording mode This unit can record to DVD+RW, DVD-RW, DVD+R You can select a recording mode among 6 options, and DVD-R discs. and the recording time will depend on the recording DVD+R/DVD-R discs can only be recorded to once. mode you select as follows. DVD+RW/DVD-RW discs can be recorded to and erased many times. Recording Recording Video/Sound Disc Size These discs are formatted with DVD+VR mode Quality mode time automatically. (good) HQ (1Hr) 18 min Discs other than DVD+VR mode cannot be recorded SP (2Hr) 36 min in this unit. SPP (2.5Hr) 45 min 8cm Disc Logo Attributes...
Page 27: Making Discs Playable In Other Dvd Player (Finalize/Make Edits Compatible)
Recording Information on DVD recording (cont’d) Making discs playable in other DVD player (Finalize/Make Edits Compatible) After recording on DVD+R/DVD-R/DVD-RW, you must finalize the disc in order to play on other units. (Refer to page 36.) There is no need to finalize DVD+RW discs but to “Make Edits Compatible” (refer to page 62) for playing on other units after editing. DVD+RW Editing titles DVD-R/DVD-RW DVD+R Playable This Unit DVD player Not Playable Not finalized Not performing Make Edits Compatible after editing titles • Once DVD+R/DVD-R/DVD-RW discs are finalized, you cannot record additionally or edit.
Page 28: Before Recording
Recording Before recording Replacing disc menu DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Option window will appear. It can be used to prohibit recording additionally or to replace the title Replace Disc Menu list after recording when inserting the disc includes titles and a different type of title list recorded by other units. “OFF” has been selected as the default. Press [SETUP]. Using [K / L], select Using [K / L], select “ON” or “Recording”. Press [OK]. “OFF”.
Page 29: Basic Recording
Recording Basic recording DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Follow the steps below to record TV programs. Press [REC I] to start record- ing. “I” mark will be displayed for 5 Press [STANDBY-ON seconds. Turn the TV on and be sure to select the input to which the unit is connected. Press [PAUSE F] to pause recording. Press [PAUSE F] or [REC I] again to restart recording. Press [OPEN/CLOSE A]. The disc tray will open. Press [STOP C] to stop record- ing.
Page 30: One-Touch Timer Recording
Recording One-touch Timer Recording DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R This is a simple way to set the recording time in blocks of 30 Press [REC I] repeatedly to minutes. Check that the disc you select desired recording time. are recording onto has enough Recording times appear on the TV space for the time you set. screen (30 minutes to 8 hours). When the recording finishes the Recording will start. recorder automatically goes into standby mode. Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit.
Page 31: Timer Recording
Recording Timer Recording DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can program the unit to record up to 8 programs within a month in Using [K / L], select the CH advance. Daily or weekly program number to record. Press [B]. recordings are also available. • Be sure to set the clock before Timer Programming setting a timer programming. Date Start Mode • Insert a recordable disc. 1. JAN/01 12:57AM 1:57AM CH 8 To record from external input,...
Page 32 Recording Timer Recording (cont’d) Checking, canceling, or correcting the timer programming information Press [STANDBY-ON To clear the timer programming: Using [K / L], select the TIMER REC indicator will be off. program. Press [CLEAR]. To correct the timer program- Press [TIMER PROG.]. ming: Timer Programming list will appear. Using [K / L], select your desired program.
Page 33: Hints For Timer Recording
Recording Timer Recording (cont’d) Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not on the tray, TIMER REC indicator flashes and Timer Recording cannot be performed. In some cases, TIMER REC indicator will be on momentarily around the start point as the unit attempts to record. Please insert a recordable disc. • When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc, ] first, then select the recorded title and press [PLAY B] or [OPEN/CLOSE A]. press [STANDBY-ON • During Timer Recording or timer standby mode (TIMER REC indicator will be on), any operations on the unit will not be available. To make these operations available, cancel the Timer Recording or timer standby mode first (TIMER REC indicator will be off). • To cancel the timer standby mode, press [STANDBY-ON • When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end during the recording, the unit turns itself off. • When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing. • If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.
Page 34: Overwriting An Existing Title
Recording Overwriting an existing title Overwriting from the beginning of the title DVD+RW DVD+RW DVD-RW DVD-RW Using [K / L], select a title to be You can overwrite the existing title overwritten. Press [OK]. from the beginning. SP (2Hr) P l a y E d i t NOV/21/06 11:00AM CH12 SP Turn on the unit.
Page 35: Hints For Overwriting
Recording Overwriting an existing title (cont’d) Hints for Overwriting When an existing title is overwritten, the title name may be changed according to the overwriting situations. Before overwriting, read the following cases and Note. When overwriting title is shorter than the existing title: (Overwriting from the beginning of the title) Overwriting Title (A) Title name: A Existing Title (B)
Page 36: Settings For An External Source
Recording Settings for an external source Connection to an external source DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Connect the external source properly to the unit by using input jacks either EXT2 (Front) or EXT1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of EXT2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Another source (VCR camcorder etc.) OUTPUT OUTPUT S- VIDEO VIDEO AUDIO AUDIO VIDEO S -VIDEO Audio Video S-Video S-Video Video Audio...
Page 37: Recording From An External Source
Recording Settings for an external source (cont’d) Recording from an external source DVD-RW DVD-R DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-R Before recording from an external source, see the instructions for the connection on page 34. 1. Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 13.
Page 38: Playing The Discs In Other Dvd Players
Recording Playing the discs in other DVD players Finalizing a disc To cancel finalizing... DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R (DVD-RW only) You will need to finalize discs to • To cancel finalizing at step 4, play in other DVD players. press [STOP C], select “Yes” Finalizing may take several with [{ / B], then press [OK]. minutes up to an hour. Finalizing is cancelled and the A shorter recording period on unit will be in stop mode. the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Do you want to cancel ? Details are on page 25.
Page 39: Auto Finalizing
Recording Playing the discs in other DVD players (cont’d) Auto finalizing DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Using [K / L], select “Disc Full” You can finalize discs or “End of Timer Rec”. Press automatically using Auto Finalize [OK]. function. You can use this function Option window will appear. to finalize discs after finishing all Timer Recordings and at the end Auto Finalize - Disc Full of the disc space.
Page 40: Playing Discs
Playing discs Information on DVD play Before you play DVD discs, read the following information. Playable discs is used primarily in the United States and Canada). This unit uses NTSC, so DVDs you play must be recorded This unit is compatible to play the following discs. in the NTSC system.
Page 41: Basic Playback
Playing discs Basic playback Playback DVD-RW DVD-R DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-R Pop-up window will appear. Press [STANDBY-ON SP (2Hr) P l a y Turn the TV on and be sure to E d i t NOV/21/06 11:00AM CH12 SP O v e r w r i t e select the input to which the unit is NOV/21/06...
Page 42: Playing Mp3 Disc
Playing discs Basic playback (cont’d) Video Video DVD-RW DVD-RW DVD-V DVD-V DVD-V DVD-V DVD-R DVD-R Video CD Video CD Press [STANDBY-ON Press [PLAY B] to start play- Turn the TV on and be sure to back. select the input to which the unit is Playback will start.
Page 43: Playing Discs Using The Disc Menu
Playing discs Basic playback (cont’d) Playing discs using the disc menu DVD-V DVD-V DVD-V DVD-V A DVD disc contains a disc menu Continue this step to set up all that describes the contents or the features you want or to start allows you to customize the playing the disc from the menu.
Page 44: Special Playback
Playing discs Special playback Resume play DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Video Video DVD-RW DVD-RW DVD-R DVD-R Video CD Video CD You can resume play from where In a few seconds, play will resume you stopped playing the disc last.
Page 45: Rapid Play
Playing discs Special playback (cont’d) Rapid play DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R DVD-V DVD-V DVD-V DVD-V DVD+R DVD+R Video Video : Press [RAPID PLAY] once DVD-RW DVD-RW DVD-R DVD-R during playback. Rapid Play function is available Plays back approximately only during playback.
Page 46: Zoom
Playing discs Special playback (cont’d) Zoom DVD-V DVD-V DVD-V DVD-V DVD+RW DVD+RW DVD+R DVD+R DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Video Video DVD-RW DVD-RW DVD-R DVD-R Video CD Video CD During playback, press Using [K / L], select a desired [DISPLAY].
Page 47: Search
Playing discs Search Title/Chapter search DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R DVD-V DVD-V DVD-V DVD-V DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current title or chap- ter and move to the next.
Page 48: Track Search
Playing discs Search (cont’d) Track search Video CD Video CD Using [PREV H] / [NEXT G] During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H].
Page 49: Repeat/Random/Program Playback
Playing discs Repeat/Random/Program playback Repeat playback DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R DVD-V DVD-V DVD-V DVD-V DVD+R DVD+R Video Video DVD-RW DVD-RW DVD-R DVD-R Video CD Video CD During playback, press Using [K / L], select a desired [DISPLAY].
Page 50: Program Playback
Playing discs Repeat/Random/Program playback (cont’d) Program playback Video CD Video CD You can program the disc to play in your desired order. Using [K / L], select a desired track. Press [OK] or [B]. A cursor will move to next. Press [SETUP].
Page 51: Switching Audio Soundtrack
Playing discs Selecting the format of audio and video (cont’d) Switching audio soundtrack Video CD Video CD DVD-V DVD-V DVD-V DVD-V When playing a DVD-Video <Audio CD> disc recorded with two or more 0:00:00 Audio CD soundtracks (these are often in different languages), you can switch them during playback.
Page 52: Switching Camera Angles
Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V DVD-V DVD-V DVD-V Some DVD-Video discs feature scenes shot from two or more Using [{ / B], select angles, check the case for details: Press [OK]. it should be marked with Angle Angle will switch each time you icon if it contains multi-angle...
Page 53: Editing
Editing Information on disc editing Guide to a title list Editing discs Title list allows you to check the titles recorded on You can edit discs for the following items. Be sure the disc easily. You can choose a title to play from that once you edit titles, they will not remain as this list and easily edit the titles as you prefer.
Page 54: Editing Discs
Editing Editing discs Deleting titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can delete titles which you do not need anymore. Be advised that the titles once deleted Using [K / L], select “Title cannot be brought back to the disc. Delete”.
Page 55: Putting Names On Titles
Editing Editing discs (cont’d) Putting names on titles DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R Using [K / L], select “Yes”. Press [OK]. You can put title names on the The name you entered will be titles and change the names from activated for the title.
Page 56: Setting Chapter Marks
Editing Editing discs (cont’d) Setting chapter marks DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put chapter marks in each • It is convenient to use [PREV [NEXT title. Once a chapter is marked, [REV [FWD you can use it for the chapter search feature.
Page 57 Editing Editing discs (cont’d) Clearing chapter marks (cont’d) Press [RETURN] to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed. To delete all chapter marks: Using [K / L], select “Yes”. Follow steps 1 to 3 on page 52 to display the Edit menu.
Page 58: Hiding Chapters
Editing Editing discs (cont’d) Hiding chapters DVD-RW DVD-R DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-R You can hide chapters from the title list. After this operation is com- Hidden chapters are skipped pleted, press [RETURN] twice during playback. to exit. Data will be written onto the disc momentarily.
Page 59: Setting Pictures For Thumbnails
Editing Editing discs (cont’d) Setting pictures for thumbnails DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can set a picture to each title for a thumbnail. It helps you to Using [K / L], select “Yes”. remember the contents of the title Press [OK].
Page 60: Dividing A Title
Editing Editing discs (cont’d) Dividing a title DVD-RW DVD+RW DVD+RW DVD-RW Using [K / L], select “Yes”. You can divide one title into two Press [OK]. new titles. The title will be divided into two new titles. Both title names are identical, and Follow steps 1 to 3 on page 52 to index pictures are reset to the first display the Edit menu.
Page 61: Editing Discs (Setup Menu)
Editing Editing discs (Setup menu) Putting name on disc DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-RW DVD-R DVD-R You can put title names on the titles and change the names from Using [K / L], select “Edit Disc this menu. Name”. Press [OK]. Press [STOP C] if you are A window for entering a title name will appear.
Page 62: Setting Or Releasing Disc Protect
Editing Editing discs (Setup menu) (cont’d) Setting or releasing disc protect DVD-RW DVD-R DVD+RW DVD+RW DVD+R DVD+R DVD-RW DVD-R To prevent accidental editing, or erasing the titles, you can protect Using [K / L]] , select “Disc them. Protect OFF ON”.
Page 63 Editing Editing discs (Setup menu) (cont’d) Setting or releasing disc protect (cont’d) Releasing disc from protect Using [K / L]] , select “Disc Protect”. Press [OK]. Follow steps 1 to 2 on page 59 to Confirmation window will appear. display the Disc Edit menu. <DVD+RW>...
Page 64: Erasing Disc
Editing Editing discs (Setup menu) (cont’d) Erasing disc Video DVD+RW DVD+RW DVD-RW DVD-RW DVD-RW DVD-RW You can erase all titles on a disc. If you want to record on DVD-RW Using [K / L]] , select “Erase formatted with other than DVD+VR Disc”.
Page 65: Changing The Setup Menu
Changing the Setup menu Tour of the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Items (highlight is the default) Contents 1.Language setting Disc Menu Language Set the language for disc menu.
Page 66: Language Setting
Changing the Setup menu Language setting Press [STOP C] if you are playing a disc. Press [SETUP]. Using [K / L], select “Playback”. Press [OK]. Playback menu will appear. Using [K / L], select “Language”. Press [OK]. Language menu will appear. Using [K / L], desired item.
Page 67: Display Setting
Changing the Setup menu Language setting (cont’d) If “Other” is selected, press 4-digit code using the Number buttons. Note • Only the languages supported Language - Subtitle by the disc can be selected. • When you finish entering • Audio Language setting may the code, press [OK].
Page 68: Audio Setting
Changing the Setup menu Display setting (cont’d) Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. • Using [K / L], select a Screen Saver Display setting. Press [OK]. OSD Language English Your setting will be activated.
Page 69 Changing the Setup menu Audio setting (cont’d) Settings for PCM (Default : 48kHz) • Using [K / L], select a setting. Press [OK]. Note Digital Out - PCM Your setting will be activated. When playing disc with 48kHz 48kHz :If your amplifier/decoder is NOT copyright protection 96kHz compatible with 96kHz PCM, select...
Page 70: Video Setting
Changing the Setup menu Video setting Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”. Press [SETUP].
Page 71: Settings For Parental Lock Level
Changing the Setup menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
Page 72: Settings For Pbc (Playback Control)
Changing the Setup menu Settings for Parental lock level (cont’d) A password has been set already. <Change the password> Parental Lock Parental Lock Parental Lock Change password? Password Input Password Input - - - - * * * * • Using the Number buttons, •...
Page 73: Others
Others Troubleshooting Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy Power...
Page 74 Others Troubleshooting (cont’d) Symptom Remedy Playback The disc does not play. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. •...
Page 75 Others Troubleshooting (cont’d) Symptom Remedy Others The unit does not operate properly. • When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. The disc tray does not open when you •...
Page 76: Language Code
Others Troubleshooting (cont’d) Error message Cause Solution Recording Error You are trying to record onto the Delete unnecessary chapter You cannot record more than marks (page 54-55). VR mode DVD-RW disc on which 254 chapters on one disc. the number of recording chapters (The maximum is 254) comes up to the maximum (254).
Page 77: Glossary
Others Glossary Analog audio Dolby Digital Regions code An electrical signal that directly The system to compress digital Regions associate discs and represents sound. Compare this sound developed by Dolby players with particular areas of the to digital audio which can be an Laboratories.
Page 78: Specifications
Others Specifications General System DVD-Video, DVD+R/RW, DVD-R/RW, CD-DA, CD-R/RW Power requirements AC120 V, 60 Hz Power consumption 20 W (standby: 1.6 W) Weight 5.06 lbs ( 2.3 kg ) Dimensions (width x height x depth) 17 3/16" x 2 5/8" x 9 5/8" (435 x 66 x 244 mm) Operating temperature 41F°...
Page 79: Español
Español Fácil grabación de DVD Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Paso 2: Encienda la unidad.
Page 80 Español Fácil grabación de DVD (cont.) Paso 5: Eleccione Paso 6: Grabe en Paso 7: Pare la el canal discos grabación. des eado. DVD. Escrit de datos SP (2Hr) NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 ENPTY TITLE CH 12 1:41:17 SP (2Hr) Esta operación puede demorar en completarse.
Page 81 MEMO Downloaded from www.Manualslib.com manuals search engine...
Page 82: Limited Warranty
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Magnavox MWR10D6 Quick Manual

Before You Start

Precautions

Table of Contents

Features

Functional Overview

Connections

Connection to a TV

Connection to a Cable Box or Satellite Box

Connection to an Audio System

Getting Started

Easy DVD Recording

Initial Setting

Channel Setting

Selecting the TV Stereo or SAP

Setting the Clock

Selecting the TV Aspect Ratio

Recording

Information on DVD Recording

Before Recording

Basic Recording

One-Touch Timer Recording

Timer Recording

Overwriting an Existing Title

Settings for an External Source

Setting a Disc to Protect

Playing the Discs in Other DVD Players

Playing Discs

Information on DVD Play

Basic Playback

Special Playback

Search

Repeat/Random/Program Playback

Selecting the Format of Audio and Video

Editing

Information on Disc Editing

Editing Discs

Editing Discs (Setup Menu)

Changing the Setup Menu

Tour of the Setup Menu

Language Setting

Display Setting

Audio Setting

Video Setting

Settings for Parental Lock Level

Settings for PBC (Playback Control)

Others

Troubleshooting

Language Code

Glossary

Frequently Asked Questions

Specifications

Español

Limited Warranty

Quick Links

Related Manuals for Magnavox MWR10D6

Summary of Contents for Magnavox MWR10D6

Table of Contents