Reset To The Default Setting (Except For Parental Setting); Information; Troubleshooting Guide - Magnavox MWD200G Owner's Manual

Reset to the Default Setting (except for PARENTAL Setting)

1
PLAY
Press [SETUP].
SETUP
STOP
SETUP menu
SETUP
QUICK
CUSTOM
INITIALIZE

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner's Manual, check the unit consulting the follow-
ing checklist.
Problem
No power
No sound or picture
No DTS audio is output
Distorted picture
Completely distorted picture or black/white
picture with DVD
No sound or distorted sound
No audio at digital output
Picture freezes momentarily during
playback.
Disc can't be played.
No return to start-up screen when disc is
removed.
The unit does not respond to the remote
control.
Buttons do not work or the unit stops
responding.
The unit does not respond to some operat-
ing commands during playback.
The unit cannot read CDs / DVDs.
Angle does not switch.
The password for rating level has been
forgotten.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner's Manual for more details on
correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
2
Select "INITIALIZE".
ENTER
SETUP
QUICK
CUSTOM
INITIALIZE

Information

Solution
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
– Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(See "Connection to a TV".)
–This unit does not support DTS audio.
This is not a malfunction.
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Connect the unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
–Reset the unit by switching the unit off, then on again.
–Aim the remote control directly at the sensor on the front of the unit.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn the volume up. If you hear some signal
sound from the radio by pressing buttons on the remote control, the remote control is working.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
–The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only
recorded for specific scenes.
–Enter the default password "477", then your forgotten password will be cleared.
-17-
3
Select "YES".
ENTER
ENTER ENTER
SETUP INITIALIZE
Initialize?
NO
YES
4
T o exit the
menu
SETUP
ENTER ENTER
Hint
Press twice.
• When you cancel
to initialize at step
, select "NO".
EN