LUMEGEN LG-S14SL-48FT-15S-20A-120V-E26-RGBW-RC Instruction Manual

COLOR CHANGING STRING LIGHTINSTRUCTION MANUAL
LEDSTNG1000055712 - LG-S14SL-48FT-15S-20A-120V-E26-RGBW-RC
IMPORTANT: Read all instructions prior to installation!
Keep instructions for future reference!
IMPORTANT SAFETY & NOTES WARNING
• Before installing, servicing, or performing routine maintenance upon this equipment,
follow these general precautions.
• To reduce the risk of death, personal injury or property damage from fire, electric
shock, falling parts, cuts/abrasions, and other hazards read all warnings and
instructions included with and on the fixture box and all fixture labels.
• Product should be installed by a certified electrician in accordance with applicable
national, state, and local building and electrical codes.
• Do not install damaged product. Inspect luminaire for damage that may have
occurred during transit or unpacking. If damaged, contact the manufacturer
immediately.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal
or other sharp objects.
WARNING
• Turn off electrical power at fuse or circuit breaker box before wiring fixture to the
power supply!
• Turn off the power when you perform any maintenance.
• Verify that supply voltage is correct by comparing it with the luminaire label
information. For use on 120V AC, 60Hz circuits only. DO NOT HARDWIRE THE STRING
LIGHT.
LumeGen | 1000 Westinghouse Drive STE 1, New Stanton PA 15672 | 800-998-6977 | Lightup.com |Page | 1
Specifications and dimensions subject to change without notice.
Project:
Date of Purchase
Included Parts List:
•
String Light Wire Set with plug
•
LED Bulbs
•
Remote Control
•
User Manual