Endress+Hauser Analytik Jena ScanDrop2 Operating Manual page 5

ScanDrop
2
1 Basic information
1.1 User manual notes
Contents
Conventions
User requirements
Symbols and signal words
The user manual informs about the design and function of the ScanDrop
the necessary know-how for the safe handling of the device and its components. Fur-
thermore, the user manual includes information on the maintenance and servicing of
the device as well as hints on potential causes for malfunctions and their correction.
Instructions for actions which occur in chronological order are numbered and combined
in action units.
Warnings are indicated by warning triangles and a signal word. The type, source and
consequences of the danger are stated together with notes on preventing the danger.
The elements of the control and analysis program are indicated as follows:
 Program terms are indicated by small caps (e.g., F
 Buttons are shown by square brackets (e.g., [OK])
 Menu items are separated by arrows (e.g., F
These instructions are aimed at qualified specialist users with knowledge of UV/Vis anal-
ysis. The instructions are limited to describing the functionality of ScanDrop
For the safe operation of the ScanDrop
SoftPro touch" operating instructions is also required. Basic knowledge of working with
2
a computer are required.
The user manual uses the following symbols and signal words to indicate hazards or in-
structions. The warnings are always placed before an action.
WARNING
This signal word indicates medium risk hazards. If not avoided, they can lead to death or
serious injuries.
CAUTION
This signal word indicates low risk hazards. If not avoided, they can lead to minor or
moderate injuries.
ATTENTION
Provides information on potential material or environmental damage.
menu).
ILE
 O ).
ILE PEN
, knowledge of the "FlashSoftPro
2
Basic information
and provides
2
.
2
" or. "Flash-
2
5