Advertisement
Transferring Files Using the IR Port with Windows 2000
Follow these steps to transfer files using the IR port with Windows 2000.
Position the NEC Versa SXi no more than three feet away from the IR device you are using and be
1.
sure that there is no greater than a 30º angle between the computer and the device.
2.
Use My Computer or Windows Explorer to display the files that you want to transfer.
3.
Right click the file(s) for transfer, then select and click Infrared Recipient.
4.
During the file transfer, a Wireless Link window may appear on the receiving IR device. Click
Yes to accept the file transfer.
Enabling the IR Port with Windows 98
The infrared icon appears on the taskbar, once the IR port is enabled in the BIOS setup. Follow these
steps to enable the IR port in Windows 98.
1.
Double click the infrared icon on the taskbar or go to Start, Settings, Control Panel, and double
click the infrared icon.
2.
Select the Options tab and place a check in the box labeled 'Enable infrared communication.'
Click Apply, then click OK to close the Infrared Monitor window.
3.
Transferring Files Using the IR port with Windows 98
Follow these steps to transfer files using the IR port with Windows 98.
Position the NEC Versa SXi no more than three feet away from the IR device you are using and be
1.
sure that there is no greater than a 30º angle between the computer and the device.
Use My Computer or Windows Explorer to display the files that you want to transfer.
2.
Right click the file(s) for transfer, then select and click Infrared Recipient.
3.
During the file transfer, an Infrared Monitor window may appear on the receiving IR device. Click
4.
Yes to accept the file transfer.
2 NEC Versa SXi Enabling the IR Port
819-200694-000
08/2000
'% &( #&!('
Advertisement
