LSK KTM790 User Manual

KTM790 HEADLIGHT ERROR ELIMINATOR
Colors of wires between the eliminator and the headlight
Red
Violet
Yellow
Black
All black GND wires are connected together - not depend which one is used for low beam and which
one for high beam lamp.
Installation
1) Connect the eliminator and the lights together using suitable connector.
2) Connect the eliminator to the original headlight socket.
3) Try the proper function and enjoy your new lights without errors.
Max allowed current draw

low beam wire: 8 A (ca 105 W)

high beam wire: 8 A (ca 105 W)

parking light wire: 3 A (ca 40W)

for higher currents please use the relay and draw power directly from the battery
Warranty
Product is covered by 2 years Limited Warranty (from the date of purchase). Limited
Warranty covers any defects in material or manufacturing defects under normal use and
maintenance. We reserve the right not to accept the claim in the case of mechanical
damage that could be related to the defect of the product or if the product was
disassembled by unauthorized service.
This limited warranty also does not cover any problem that is caused by conditions,
malfunctions or damage not resulting from defects in material or workmanship.
During warranty period, we will repair or replace defective product or defective parts. To
obtain warranty service, you must first contact us to determine the problem and the most
appropriate solution for you.
Contact e-mail is: info@lskelectronics.com
LEDERCAN_KTM790
USER'S MANUAL
+12V high beam
+12V passing beam
+12V parking light
GND