NEC VERSA DOCK Important Information Manual page 2

NEC Versa LX (AGP) and LXi
The original shipping configuration of your NEC Versa LX (AGP) and LXi systems includes the
CMD driver that is also provided on the Versa Dock Software Setup CD. Use the Setup CD to
re-install the CMD driver to your NEC Versa LX (AGP) and LXi system only if you have
replaced the original shipping configuration with a generic Windows 95, a generic Windows 98,
or a customized operating environment.
Windows 98 SE, install the CMD driver before docking for the first time. Failure to install the
drivers before docking may result in a corrupted Registry or data loss.
Note
Although the Versa Dock Software Setup CD contains a variety of drivers, only use the
Setup CD to either re-install the CMD driver or to install the online user's guide.
Follow these steps to re-install the CMD driver on your NEC Versa LX (AGP) or LXi.
Be sure that your system is undocked.
1.
2. Insert the NEC Versa Dock Software Setup CD into the NEC Versa. If autorun is enabled,
the CD starts and the Setup screen appears. Close the Setup screen and go to step 3.
Double click the My Computer desktop icon.
3.
Right click the CD-ROM icon, Versa_dock (on LX systems) and Versa (on LXi systems).
4.
5. Highlight and click Open, then double click the Software folder.
Double click the 95 folder (on LX systems) or 9x (on LXi systems), then double click the
6.
CMD folder.
Double click the Setup icon to initiate the installation process.
7.
Follow the on-screen instructions to install the driver for Windows 95/Windows 98.
8.
9. Reboot your system when prompted. Your NEC Versa notebook is now ready to dock!
NEC Versa LX or SX
Follow these steps to install the CMD driver on your NEC Versa LX or SX system.
Be sure that your system is undocked.
1.
Insert the NEC Versa Dock Software Setup CD into the NEC Versa system. If autorun is
2.
enabled, the CD starts and the Setup screen appears. If the CD does not start, do the
following.
Click NEC Customize on the desktop.
3.
4. Highlight Application and Driver CD (to launch the NEC Versa Dock Software Setup CD).
5. Click Launch.
Highlight CMD PC1646UX 32-Bit Local Bus Master IDE Driver and then click Install.
6.
Follow the on-screen instructions to install the driver for Windows 95/Windows 98.
7.
8. Reboot the system when prompted.
9. Your NEC Versa notebook computer is now ready to dock!
2 NEC Versa Dock Important Information
If you upgraded the NEC factory-installed Windows 95 or 98 to