McKesson Quintet AC Owner's Manual page 5

• If the meter or test strips have been exposed to a substantial change in temperature, wait at least 30
minutes to test.
• Pay attention to the environment protection policy when disposing of batteries.
• Only use the meter in environmental conditions of 10°C to 40°C (50°F to 104°F) and relative humidity
(RH) of 10% to 90%.
Sample Size Example
• Use a minimum of 1.0μL to test blood glucose levels. Blood sample size above 3.0μL may contaminate
the test strip port and the meter.
• Blood sample size below 1.0μL may result in inaccurate test result or may not initiate meter
measurement. In this case, repeat the test with a new test strip.
• The unit of measure must be fixed to "mg/dL". When your display shows "mmol/L" during setting or
test, please contact customer service. Use of the wrong unit of measure may cause incorrect results.
• Keep Control Solution, Test Strips, and all vials out of the reach of children.
1.0 µL 1.5 µL 2.0 µL 3.0 µL 4.0 µL
Precaution
5