Performing A Test - McKesson Quintet AC Owner's Manual

Performing a Test

1. A new pair of clean gloves should be worn before proceeding a test.
2. Take out a new test strip from the vial and re-cap the vial immediately.
3. Insert the test strip into the test strip port of the McKesson Quintet AC blood
glucose meter with the indication symbol facing up. The meter confirms the
insertion of the strip with a beep (if the volume is turned on).
4. The " " symbol will appear and will be accompanied by a "beep" that will
sound (if the volume is turned on). The meter is now ready for testing (within
2 minutes).
5. Use auto-disabling, single use lancing device against the finger for blood
sample.
NOTE
• The McKesson Quintet AC blood glucose meter will automatically detect the code number on
the test strip. There is no need for verification of the display code to the test strip vial.
28