D-Link DAP-2622 Quick Installation Manual page 4

Connecting through Ethernet
1. Use an Ethernet cable to connect the DAP-2622 to the management computer, or to the switch or router
the management computer is connected to.
2. Manage the access point from a computer. Enter dap2622.local in the address field of your browser.
3. Log in to the administration user interface. The default login information is:
Username: admin
Password: admin
Connecting Wirelessly
1. Connect the management computer to the default SSID of the DAP-2622, «dlink».
2. Manage the access point from a computer. Enter dap2622.local in the address field of your browser.
3. Log in to the administration user interface. The default login information is:
Username: admin
Password: admin
Mounting
Mounting on a Solid Wall
For optimal coverage, mount the DAP-2622 on the wall. An Ethernet cable running through an electrical wall
box should be pre-installed before mounting.
Figure 4: Attaching the Mounting Plate
1. Place the mounting plate over an electrical wall box and mark the location where to drill the holes in the
wall. The Ethernet cable should pass through the mounting plate.
2. Drill holes on the markings and place the included anchors into the drilled holes.
3. Align and place the mounting plate on top of the anchors and use the included screws to secure the
mounting plate to the surface.
Figure 5: Attaching the Cable
4