Laser Compliance Statement; Hazardous Voltage; Communication Regulation - NEC POWERMATE - VERSION 2008 Manual

Table of Contents

LASER COMPLIANCE STATEMENT

The optical devices are tested and certified to be compliant with International Electro-technical Commission

IEC825-1 and European Norm EN60825-1 and EN60825-2 regulations for Class 1 laser products.

Class 1 laser products are not considered hazardous. The optical devices are designed such that there is

never human access to laser radiation above a Class 1 level during normal operation or prescribed

maintenance conditions.

The optical devices installed in your computer are designed for use solely as components of such electronic

products and therefore do not comply with the appropriate requirements of Code of Federal Regulation Sec.

1040.10 and Sec. 1040.11 for COMPLETE laser products.

WARNING

WARNING- - - - HAZARDOUS VOLTAGE!

Hazardous voltage is present inside your computer when it is connected to an AC supply even when the

computer's power switch is off. Exposure to Hazardous Voltage could cause personal injury. To avoid risk of

injury, contact an Authorised Service Provider for proper installation of optional hardware devices.

Radio- - - - communication Regulation (if applic

Radio

communication Regulation (if applicable)

communication Regulation (if applic

Specific regulations apply when using wireless radio-communication products.

able)

- 16 -

Table of Contents

Powermate