Cardo Systems PACKTALK PRO Manual page 30

6. TROUBLESHOOTING
6.1 SOFT RESET
If your PACKTALK PRO stops responding, reset it in one of these ways:
Turning it off and then on again (see Switching Your Unit On/Off).
●
Rebooting the unit, by simultaneously pressing
●
6.2 RESET TO FACTORY SETTINGS
This option deletes all paired units, devices and all configuration settings.
To perform a factory reset through the unit:
1. Check that your PACKTALK PRO is in Standby mode.
2.
The LED flashes red 5 times.
3. A factory reset can also be performed with the Cardo Connect App.
6.3 FAQ
Additional answers to common problems can be found at
for 10 seconds.
10 seconds.
www.cardosystems.com/support/packtalk-edge
30